|
[China]
Trade Verify
Address: Room 101 and 201, No. 18 Workshop, Phase 1 project of Zhongnan Hi Tech Zhuzhou Intelligent Manufacturing Industrial Park, No.329, Xinma West Road, Tianyuan District, Zhuzhou City, Hunan Province.China
Contact name:Tracy
Zhuzhou Gold Sword Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
Made from 100% virgin raw material.
Ultrafine grain sizes
Produced with advanced equipments and process
All products go through in process and final inspection
Stable and continuous production ability
Cemented carbide has a series of excellent properties such as high
hardness, wear resistance, strength and toughness, heat resistance
and corrosion resistance, especially its high hardness and wear
resistance, which remains basically unchanged even at a temperature
of 500 ° C. It still has a high hardness at 1000 °C.
Carbide is widely used as a tool material, such as turning tools,
milling cutters, planers, drills, boring tools, etc., for cutting
cast iron, non-ferrous metals, plastics, chemical fiber, graphite,
glass, stone and ordinary steel, can also be used for cutting
Hard-to-machine materials such as heat-resistant steel, stainless
steel, high manganese steel, and tool steel.
Classification
Drag blades: used in non-powered tools such as UCT, KCT, VCT, SCT,
C2
Particularly suitable for Foils, Paper, Thin folding carton,
PVC,Plastic ,Carpet ,Light foam core etc.
Oscillating blades: used in EOT / POT oscillating tools.
Recommended materials: Folding carton, Gasket materials, Foam,
Leather,Rubber, Felt,Woven , Textiles, Plastic etc.
Rotary blade: decagonal (ten-sided) blades for DRT / PRT tools.
Recommended for breathable materials such as textile, carbon fibre,
glass fibre, etc.
Coating blade mark and use recommended
| ISO classification | Mark | uses | Cutting speed(m/min) |
| P | YBC151 | High wear-resistant matrix and ultra-thick composite coating for steel finishing. | 180-460 |
| YBC152 | 220-550 | ||
| YBC251 | A tough base with good edge safety and a coating of MT-TiCN for semi-finishing of steel. | 160-440 | |
| YBC252 | 180-480 | ||
| YBC351 | The highly plastic matrix and the composite thick coating are suitable for roughing of steel. | 130-380 | |
| M | YBM151 | Suitable for finishing and semi-finishing of stainless steel. | 110-280 |
| YBM251 | Suitable for semi-finishing of stainless steel. | ||
| YBM351 | Suitable for rough finishing of stainless steel. | ||
| K | YBD052 | The chemical ultra-thick coating combines with a hard matrix to provide excellent wear resistance in high-speed dry cutting of grey cast iron. | 200-500 |
| YBD102 | Chemically coated grade for high speed cutting of ball cast iron. | 200-480 | |
| YBD152 | Good anti-flaking, suitable formedium- and high-speed turning in cast iron, and can withstand slight interrupted cutting at medium speed. | 180-450 | |
| YBD252 | Suitable for turning in medium and low speed wet milling and intermittent conditions of cast iron with toughness requirements. | 150-380 |
Recommended cutting amount ( B04 )
| Raw material | processing method | Mark | Cutting speed(m/min) | |
| P | steel | c | YBC151 | 180-460 |
| YBC152 | 220-500 | |||
| semi finishmachining | YBC251 | 160-440 | ||
| YBC252 | 180-480 | |||
| rough finish machining | YBC351 | 130-380 | ||
| M | stainless steel | fine machining, semi finish machining, rough finish machining | YBM151 YBM251 | 110-280 |
| K | cast iron | fine machining | YBD052 | 200-500 |
| YBD102 | 200-480 | |||
| semi finish machining | YBD151 | 180-450 | ||
| YBD152 | 190-450 | |||
| rough finish machining | YBD252 | 150-380 | ||
