Changzhou Xinpeng Tools Manufacturing Co.,Ltd |
Verified Suppliers
|
|
1 Inch 2 Inch Square End Mill / High Speed Steel Milling Cutters General Processing
KTC Tungsten Carbide General Processing End Mills
Specifications
4 Flute Square End Mill precision cutting tools capable of increasing productivity and meeting some of the most challenging application requirements. cutting tools are produced using high quality, fine grain solid carbide with a reinforced shank diameter to maximize stability. The consistent edge preparation performed on even the smallest diameters is necessary to accurately produce modern micro workpiece geometries
E550 general processing milling cutter series adopt domestic high-quality fine grain tungsten steel material. Flexural strength: 3900mpa, grain size: 0.8μm, with coating (black / Bronze) by imported coating equipment. E550 milling cutters are with special angle design and strict quality control, which is especially suitable for ordinary medium and low carbon steel, alloy steel and other materials processing. With high precision quality control, and full inspection, all E550 series end mills are delivered with 100% qualification rate.
Raw Material | YL10.2 / K30 |
WC | 90% |
Co | 10% |
TRS | >3900N/mm2 |
Hardness | >91.5HRA |
A.O.L | 50mm-150mm |
Grain size | 0.8 μm |
Upto | HRC55 |
Flutes No | 4F |
Coating | AlTiN or TiSiN |
Suitable for | Steel,stainless steel,nickel alloy,Titanium alloy,cast iron, plastic and other materials |
Coating:
Item | AlTiN | TiSiN |
Hardness(HV): | 3200 | 3600 |
Thickness(UM): | 2.5-3 | 3 |
Oxidation Temp(°): | 900 | 1000 |
frictional Coefficient: | 0.3 | 0.45 |
Color: | Black | Copper |
Standard Sizes
Size | Flute Length of End Mills(mm) | ||
Flat end | Ball Nose | Round nose | |
D1*D4*50 | 3 | 2 | 3 |
D1.5*D4*50 | 4 | 3 | 4 |
D2*D4*50 | 5 | 4 | 5 |
D2.5*D4*50 | 6 | 5 | 6 |
D3*D4*50 | 8 | 6 | 8 |
D3*D3*50 | 8 | 6 | 8 |
D3.5*D4*50 | 9 | 7 | 9 |
D4*D4*50 | 10 | 8 | 10 |
D1*D6*50 | 3 | 2 | 3 |
D1.5*D6*50 | 4 | 3 | 4 |
D2*D6*50 | 5 | 4 | 5 |
D2.5*D6*50 | 6 | 5 | 6 |
D3*D6*50 | 8 | 6 | 8 |
D3.5*D6*50 | 9 | 7 | 9 |
D4*D6*50 | 10 | 8 | 10 |
D6*D6*50 | 13 | 10 | 13 |
D6*D6*50 | 15 | 12 | 15 |
D7*D8*60 | 17 | 14 | 17 |
D8*D8*60 | 20 | 16 | 20 |
D10*75 | 25 | 20 | 25 |
D12*75 | 30 | 24 | 30 |
D14*100 | 45 | 28 | 35 |
D16*100 | 45 | 32 | 40 |
D18*100 | 45 | 36 | 40 |
D20*100 | 45 | 40 | 40 |
Flute Length of Extended End Mills(mm) | |||
D3*D4*75 | 12 | 6 | 12 |
D4*D4*75 | 16 | 8 | 14 |
D5*D6*75 | 18 | 10 | 15 |
D6*D6*75 | 24 | 12 | 20 |
D8*75 | 25 | 16 | 25 |
D3*D4*100 | 12 | 6 | 15 |
D4*D4*100 | 20 | 8 | 15 |
D5*D6*100 | 20 | 10 | 20 |
D6*D6*100 | 30 | 12 | 25 |
D8*D8*100 | 35 | 16 | 30 |
D10*100 | 40 | 20 | 30 |
D12*100 | 45 | 24 | 35 |
D6*D6*150 | 45 | 12 | 40 |
D8*D8*150 | 50 | 16 | 45 |
D10*150 | 55 | 20 | 50 |
D12*150 | 55 | 24 | 55 |
D14*150 | 60 | 28 | 60 |
D16*150 | 70 | 32 | 65 |
D18*150 | 70 | 36 | 70 |
D20*150 | 70 | 40 | 70 |