|
Trade Verify
Address: Xixiashu Industrial Zone,Xinbei District,Changzhou City,Jiangsu Province,China
Contact name:KING
Changzhou Xinpeng Tools Manufacturing Co.,Ltd |
|
Verified Suppliers
|
|
|
High Performance End Mills For Steel Two Flute GU25UF Raw Material
Specifications
E600 high performance milling cutter series is made of domestic well-known high-quality fine grain tungsten steel material, with flexural strength of 4300mpa and grain size of 0.4 μm, and is coated with AlTiN or TiSiN imported from Switzerland. The cutter is designed with large helix angle, which can realize high-speed and efficient machining, especially suitable for medium and high carbon steel, die steel, pre-hardened steel and other materials processing. With high precision quality control, and full inspection, all E600 series end mills are delivered with 100% qualification rate.
| Material | GU25UF |
| WC | 88% |
| Co | 12% |
| TRS | >4300N/mm2 |
| Hardness | >92HRA |
| A.O.L | 50mm-150mm |
| Grain size | 0.4μm |
| Upto | HRC60 |
| Flutes No | 2 Flutes |
| Coating | AlTiN or TiSiN |
| Suitable for | Steel,stainless steel,nickel alloy,Titanuim alloy,cast iron,plastic and other materials |
Coating:
| Item | AlTiN | TiSiN |
| Hardness(HV): | 3200 | 3600 |
| Thickness(μm): | 2.5-3 | 3 |
| Oxidation Temp(°): | 900 | 1000 |
| frictional Coefficient: | 0.3 | 0.45 |
| Color: | Black | Copper |
Standard Sizes
| Size | Flute Length of End Mills(mm) | ||
| Flat end | Ball Nose | Round nose | |
| D1*D4*50 | 3 | 2 | 3 |
| D1.5*D4*50 | 4 | 3 | 4 |
| D2*D4*50 | 5 | 4 | 5 |
| D2.5*D4*50 | 6 | 5 | 6 |
| D3*D4*50 | 8 | 6 | 8 |
| D3*D3*50 | 8 | 6 | 8 |
| D3.5*D4*50 | 9 | 7 | 9 |
| D4*D4*50 | 10 | 8 | 10 |
| D1*D6*50 | 3 | 2 | 3 |
| D1.5*D6*50 | 4 | 3 | 4 |
| D2*D6*50 | 5 | 4 | 5 |
| D2.5*D6*50 | 6 | 5 | 6 |
| D3*D6*50 | 8 | 6 | 8 |
| D3.5*D6*50 | 9 | 7 | 9 |
| D4*D6*50 | 10 | 8 | 10 |
| D6*D6*50 | 13 | 10 | 13 |
| D6*D6*50 | 15 | 12 | 15 |
| D7*D8*60 | 17 | 14 | 17 |
| D8*D8*60 | 20 | 16 | 20 |
| D10*75 | 25 | 20 | 25 |
| D12*75 | 30 | 24 | 30 |
| D14*100 | 45 | 28 | 35 |
| D16*100 | 45 | 32 | 40 |
| D18*100 | 45 | 36 | 40 |
| D20*100 | 45 | 40 | 40 |
| Flute Length of Extended End Mills(mm) | |||
| D3*D4*75 | 12 | 6 | 12 |
| D4*D4*75 | 16 | 8 | 14 |
| D5*D6*75 | 18 | 10 | 15 |
| D6*D6*75 | 24 | 12 | 20 |
| D8*75 | 25 | 16 | 25 |
| D3*D4*100 | 12 | 6 | 15 |
| D4*D4*100 | 20 | 8 | 15 |
| D5*D6*100 | 20 | 10 | 20 |
| D6*D6*100 | 30 | 12 | 25 |
| D8*D8*100 | 35 | 16 | 30 |
| D10*100 | 40 | 20 | 30 |
| D12*100 | 45 | 24 | 35 |
| D6*D6*150 | 45 | 12 | 40 |
| D8*D8*150 | 50 | 16 | 45 |
| D10*150 | 55 | 20 | 50 |
| D12*150 | 55 | 24 | 55 |
| D14*150 | 60 | 28 | 60 |
| D16*150 | 70 | 32 | 65 |
| D18*150 | 70 | 36 | 70 |
| D20*150 | 70 | 40 | 70 |
Differences of flute:
Two Flute. This configuration provides the most amount of space for chip ejection and is ideal for cutting softer materials like aluminum.
Three Flute. This configuration can handle both ferrous and
non-ferrous materials and provides a better part finish and overall
strength.
Four Flute. The extra flute in this configuration provides faster
feeds rates and higher quality finishes than two or three flute
setups. However, you also run the risk of reduced chip removal
space and jamming.
