|
Trade Verify
Address: Xixiashu Industrial Zone,Xinbei District,Changzhou City,Jiangsu Province,China
Contact name:KING
Changzhou Xinpeng Tools Manufacturing Co.,Ltd |
|
Verified Suppliers
|
|
|
Extra Long Reach Thread Mill Cutter / End Mill Cutting Tools In Drill Press
KTC Thread Mill Cutter
Specifications
| Raw Material | GU25UF |
| WC | 88% |
| Co | 12% |
| TRS | >4300N/mm2 |
| Hardness | >92HRA |
| A.O.L | 50mm-90mm |
| Grain size | 0.4 μm |
| Upto | HRC60 |
| No. of Flutes | 3/4flutes |
| Suitable for | Aluminum,plastic and other materials |
Standard Sizes
| M ISO Standard 3*P | |||||||
| Pitch (mm) | M Coarse Thread | Shank Dia. | Edge Dia. | No. of Flutes | Flute Length | Overall Length | Bottom Hole Dia. |
| 0.25 | M1.0*0.25 | 4 | 0.73 | 3 | 2.3 | 50 | 0.75 |
| 0.25 | M1.2*0.25 | 4 | 0.92 | 3 | 2.8 | 50 | 0.95 |
| 0.3 | M1.4*0.3 | 4 | 1.05 | 3 | 3.2 | 50 | 1.05 |
| 0.35 | M1.6*0.35 | 4 | 1.2 | 3 | 3.3 | 50 | 1.25 |
| 0.35 | M1.8*0.35 | 4 | 1.41 | 3 | 4.1 | 50 | 1.45 |
| 0.4 | M2.0*0.4 | 4 | 1.54 | 3 | 4.4 | 50 | 1.6 |
| 0.45 | M2.2*0.45 | 4 | 1.63 | 3 | 4.8 | 50 | 1.75 |
| 0.45 | M2.5*0.45 | 4 | 1.96 | 3 | 5.3 | 50 | 2.05 |
| 0.5 | M3*0.5 | 4 | 2.4 | 3 | 6.4 | 50 | 2.5 |
| 0.6 | M3.5*0.6 | 4 | 2.75 | 3 | 7.4 | 50 | 2.9 |
| 0.7 | M4*0.7 | 4 | 3.15 | 3 | 8.6 | 50 | 3.3 |
| 0.75 | M4.5*0.75 | 4 | 3.5 | 3 | 9.5 | 50 | 3.75 |
| 0.8 | M5*0.8 | 6 | 4 | 3 | 12 | 50 | 4.2 |
| 1.0 | M6*1.0 | 6 | 4.75 | 3 | 13 | 50 | 5 |
| 1.25 | M8*1.25 | 6 | 6 | 3 | 17.3 | 50 | 6.8 |
| 1.5 | M10*1.5 | 8 | 8 | 3 | 21.8 | 50 | 8.5 |
| 1.75 | M12*1.75 | 10 | 10 | 4 | 24 | 75 | 10.3 |
| 2.0 | M14*2 | 10 | 10 | 4 | 25 | 75 | 12 |
| 2.0 | M16*2 | 12 | 11.5 | 4 | 27 | 75 | 14 |
| 2.5 | M20*2.5 | 16 | 15 | 4 | 36 | 90 | 17.5 |
| 0.5 | M4*0.5 | 4 | 3 | 3 | 8.6 | 50 | 3.5 |
| 0.75 | M6*0.75 | 6 | 4.8 | 3 | 13 | 50 | 5.25 |
| 1.0 | M8*1.0 | 6 | 6 | 3 | 17.3 | 50 | 7 |
| 0.75 | M8*0.75 | 6 | 6 | 3 | 17.3 | 50 | 7.25 |
| 0.5 | M8*0.5 | 6 | 6 | 3 | 17.3 | 50 | 7.5 |
| 1.25 | M10*1.25 | 8 | 8 | 3 | 21.8 | 60 | 8.75 |
| 1.0 | M10*1.0 | 8 | 8 | 3 | 21.8 | 60 | 9 |
| 0.75 | M10*0.75 | 8 | 8 | 3 | 21.8 | 60 | 9.25 |
| 0.5 | M10*0.5 | 8 | 8 | 3 | 21.8 | 60 | 9.5 |
| 1.5 | M12*1.5 | 10 | 10 | 4 | 25 | 75 | 10.5 |
| 1.25 | M12*1.25 | 10 | 10 | 4 | 25 | 75 | 10.75 |
| 1.0 | M12*1.0 | 10 | 10 | 4 | 25 | 75 | 11 |
| 1.5 | M14*1.5 | 10 | 10 | 4 | 28 | 75 | 12.5 |
| 1.25 | M14*1.25 | 10 | 10 | 4 | 28 | 75 | 12.75 |
| 1.0 | M14*1.0 | 10 | 10 | 4 | 28 | 75 | 13 |
| 1.5 | M16*1.5 | 12 | 12 | 4 | 30 | 75 | 14.5 |
| 1.25 | M16*1.25 | 12 | 12 | 4 | 30 | 75 | 14.75 |
| 1.0 | M16*1.0 | 12 | 12 | 4 | 30 | 75 | 15 |
| 2.0 | M20*2.0 | 16 | 15.8 | 4 | 40 | 90 | 18 |
| 1.5 | M20*1.5 | 16 | 15.8 | 4 | 40 | 90 | 18.5 |
| 1.0 | M20*1.0 | 16 | 15.8 | 4 | 40 | 90 | 19 |
| 3.0 | M24*0.3 | 16 | 16 | 4 | 45 | 90 | 21 |
| UN 3*P | ||||||||
| Pitch (TPI) | UNC | UNF | Shank Dia. | Edge Dia. | No. of Flutes | Flute Length | Overall Length | Bottom Hole Dia. |
| 72 | No.1-72 | 4 | 1.45 | 3 | 3.9 | 50 | 1.6 | |
| 64 | No.1-64 | No.2-64 | 4 | 1.45 | 3 | 4.2 | 50 | 1.5 |
| 56 | No.2-56 | No.3-56 | 4 | 1.65 | 3 | 5.0 | 50 | 1.8 |
| 48 | No.3-48 | No.4-48 | 4 | 1.9 | 3 | 6.0 | 50 | 2.1 |
| 40 | No.4,No.6-40 | No.6-40 | 4 | 2.1 | 3 | 6.0 | 50 | 2.3 |
| 40 | No.5-40 | No.6-40 | 4 | 2.45 | 3 | 7.2 | 50 | 2.6 |
| 36 | No.8-36 | 4 | 3.3 | 3 | 8.7 | 50 | 3.5 | |
| 32 | No.6,No.8-32 | No.10-32 | 4 | 2.55 | 3 | 7.4 | 50 | 2.8 |
| 32 | No.8-32 | No.10-32 | 4 | 3.2 | 3 | 10.0 | 50 | 3.5 |
| 32 | No.10-32 | 4 | 3.8 | 3 | 10.3 | 50 | 4.0 | |
| 28 | 1/4-28 | 6 | 5.25 | 3 | 13.2 | 60 | 5.5 | |
| 24 | No.10-24 | 5/16-24 | 4 | 3.58 | 3 | 10.2 | 50 | 3.9 |
| 24 | 5/16-24 | 8 | 6.68 | 3 | 16.5 | 60 | 6.9 | |
| 20 | 1/4-20 | 7/16-20 | 6 | 4.88 | 3 | 13.4 | 60 | 5.2 |
| 20 | 7/16-20 | 10 | 9.55 | 4 | 23 | 75 | 9.9 | |
| 18 | 5/16-18 | 8 | 6.15 | 3 | 16.9 | 60 | 6.6 | |
| 16 | 3/8-16 | 8 | 6.7 | 3 | 19.1 | 60 | 8.0 | |
| 14 | 7/16-14 | 10 | 9.0 | 4 | 23.3 | 75 | 9.4 |
