Full Automatic Metal Tin Bucket Barrel Lugs Pail Can Making
Production Line Wire Handle Machine
Full-auto Wire Handle Machine
Product Introduction
This economic wire handle machine is special made for customers,
using cam transmission, cam conveying,which can reach 30cpm up.The
forming of the wire handle is flat U shape hook & fold inside
to make the wire handle not easy to come out and not pierce through
pail body.Locating by sensor & mechanical combined, it makes
the hook insert more precisely. It uses V-shape bearing to correct
the wire from wire feeding rollers to forming, making the
changeover of wire more convenient. This machine can be perfectly
connected with the automatic production line for pails, to make it
more efficient & safe.
Main Technical Parameters
Output:30CPM
Production range:Φ220mm-Φ300mm
Applicable height:280-500mm
Distance between beading and ears:≥20mm
Distance between top end and ears:35+(L-180)~65+(L-180)mm
Wire diameter:3.5-4.0mm
Whole power:15KW
Applicable air pressure:≥0.6Mpa
Connecting height:1000±20mm
Weight:App.4T
Dimension(LXWXH):2720x2940x2720mm
The combined machine consists of
1 Welding system
The spot welding machine is used to weld the lugs on the both side
of conical pails or paint cans, so the machine is also name ear
welding machine or lug welding machine.
2 Hopper
The hopper is also named as vibrator, it is a funnel shape device
to fill with welding lugs or ears and arrange it in sequence, then
feed the lugs one by one onto the paint can body or conical pail
body.
3 Wire decoiler
The wire decoiling machine is to load the coil of metal wire, and
decoil it to feed the wire placing system
4 Bail placing system
For the paint cans or conical pails, they are attached two lug
components and placed with bail, so the can or pail can be equipped
with wire handle. The bail placing machine can bend the wire to
form as handle shape, insert the plastic grip onto the wire, and
bend the hook on both side of wire handle, then attach the wire
handle onto the container body automatically.
5 Spray coating system
The inside welding position of lugs can be coated by the spot
coating system, the coating layer can protect the inside welding
spot well.
How does the ear handle combination machine work?
1 Preparation of lugs, wire and grips
The welded lugs, formed wire and inserted grips are put on the
hopper and decoiler first, preparing for the feeding.
2 Positioning
The paint can or conical pail are fed and detected for positioning
the welding seam, so the position of welding spot can keep
consistence.
3 Spot welding
The conical pail or paint can are welded with two piece of lugs at
the same time, then conveyed to the next station.
4 Handle forming and attaching
After the ear welding, the metal wire is formed and attached onto
the container body.
5 Spot coating
After the spot welding and handle mounting, the spray nozzle will
coat a layer on the welding point by spraying.