Active Member
|
[China]
Address: UNIT04,7/F BRIGHT WAY TOWER NO.33 MONG KOK RD KL HONGKONG CHINA
Contact name:Richard
Garant Optima Co., Ltd |
|
|
The multifunctional 2CH HD-SDI To Fiber converter also named as SDI fiber optic extender or SDI fiber multiplexer,which consists of 1 piece of HDSDI fiber transmitter and 1 piece of SDI receiver.It transmits 2ch Unidirectional SDI or 1CH Bidirectional HD-SDI signal (also compatible ASI,and each SDI signal includes 1 embedded audio signal)and 1ch bidirectional analog audio,1ch 10/100M ethernet,1ch bidirectional RS485/RS422/RS232 to a long distance over one fiber. It’s a popular product widely used in TV live broadcast, high-definition video conferencing, video surveillance and other fields.
FEATURES
1,Compatible with SMPTE344M,SMPTE-292M 3G/HD-SDI and SMPTE-259M SD-SDI standard signals, supporting 1485Mb/s and 270Mb/s, 2.97Gbps rate
2, support 1ch 10/100M ethernet with RJ45 interface and 1ch bidirectional/ unidirectional RS485/RS422/RS232 with Phoenix terminal interface, up to 115.2Kb/s baud rate
3,Support 1080I@60, 50, 720P@60, 50, 30, 25, and other video formats.
4, Input with cable equalization function to compensate for cable transmission loss
5, Built-in ESD and surge protection circuit to prevent static electricity and lightning damage
6, Provide optical disappearance alarm, remote power failure alarm, output signal status indication, and input signal lock status indication
7,Stand-alone type or card-type installed in 19’’ 4U rack-mount chassis.
DESCRIPTION
The SDI video to fiber converter is an ideal and economic solution for broadcast or surveillance applications. It receives 3G/HD-SDI, audio, RS485/RS422/RS422 and ethernet signals electrically input, perfectly converts them to single mode optic signals. The SDI series fiber video converter are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation ,which is suitable for different working environment .
SPECIFICATION
Opitcal:
| Wavelength | 1310nm,1550nm |
| Serial digital video input/output voltage | Typical Max value 800mVp-p, 600~1000mVp-p |
| Fiber Type | 50/125u multimode,62.5/125u multimode,9/125u single mode,single fiber or dual fibers |
| Video Signal Return loss | ≤-15dB@5MHz～1.5GHz,-10dB@1.5GHz～3GHz |
| Optical connector | SC,FC |
| Distance | 0~500M (MM) / 0~100KM (SM,selectable) |
Data:
| Data protocol | Unidirectional or Bidirectional RS485 or RS422 or RS232,selectable |
| Data rate | 0~115.2 Kbps |
| Error rate | < 10-9 |
| Connector | Industrial standard terminal block (also can be configured with interfaces such as DB9/DB25) |
Audio
| Number of Channels | 1Bidirectional or 1unidirectional,selectable |
| Input Connector | 3.5mm |
| Output Connector | 3.5mm |
| Impedance | 600 Ohm |
| digital width | 20 bits |
| Max input/output voltage | 2VP-P |
| Frequency Response | 20Hz~20KHz |
| SNR | > 85dB |
| Sampling frequency | 48KHz |
Ethernet
| Work mode | Full duplex/half duplex |
| Data Rate | 10/100Mbps(AUTO) |
| connection terminal | RJ45 |
Video:
| SDI Input | ||
| Signal Type SDI | MPTE259M,292M,344M | |
| Data Rates | 143Mbit/s – 2.97Gbit/s | |
| Cable Equalization | ≤140meters of Belden 1694A at 1.485Gbps ≤400meters of Belden 1694A at270Gbps | |
| Connector | BNC 75 Ohm | |
| General: | ||
| Input Power | 5 V DC | |
| Power consumption (maximum) | 5W | |
| Operating temperature | 0°C to 55°C | |
| Storage temperature | -20°C to 70°C | |
| Operating humidity | 0 ~ 95% (non-condensing) | |
| Dimension For The Converter(TX&RX) | 175x130x32MM | |
| Dimension For The Package of 1 Pair | 320x247x61MM | |
| Net Weight | 1.3KG | |
| Gross Weight | 1.5KG | |
| Case material | Aluminum | |
Panel Diagram:
Dimension:
Packing Information:
Connection Diagram
Other Model:
