|
[China]
Trade Verify
Address: No. 125, Keji 2nd Rd., East Lake High-Tech Development Zone,Wuhan, Hubei 430040, China
Contact name:
Camel Group Co., Ltd. |
|
Verified Suppliers
|
|
|
12V 330Ah Lead-acid Heavy Duty Vehicle AGM Dual Purpose Battery
AGM dual purpose batteries are the top performers among the truck batteries. The positive and negative lead plates are separated by an absorbent glass mat holding the electrolyte. The plates and separator are tightly compressed in cells. This extremely tight compression limits the shedding of plate material that happens during battery cycling and produces significantly longer battery life. The compression means lower internal resistance and maximize power output, so as to improve performance in cold temperatures. What's more, the dual purpose AGM batteries is deep cycling and charging up faster comparing to flooded lead acid batteries.
Product Features
1. Compressed assembly: Help to prevent the shedding of active mass, longer service life.
2. Unique hybrid paste formula: Enhanced cycle life,smaller Internal resistance.
3. AGM separator: The electrolyte is adsorbed in the separator, which helps to improve electrolyte stratification, and reduce grid corrosion.
4. Oxygen recombination during battery charging: Effectively prevent gas evolution, reduce the battery water loss.
5. No flowing electrolyte: Safe and green, maintenance free.
Product Model
| Type | Voltage (V) | C20 | RC(min) | CCA (-18℃) | Dimensions(mm) L*W*H | Weight (kg) | Cycle Life (GB II) |
| 6-QFD-330 | 12 | 330 | 740 | 1200 | 527*280*250 | 84 | 360 |
Applications
The heavy duty AGM dual purpose batteries are applied to the heavy vehicles requiring both the cranking power and low-amp cycling power to meet the electricity needs of electrical appliances.
About Camel
Founded in 1980, Camel Group Co., Ltd.(Stock No: SH601311) is
specialized in the R&D, production and sales of lead-acid
batteries, with the production of EV lithium-ion battery and used
battery recycling as the supplement. Camel is the largest and
leading car battery manufacturer in Asia.
Currently, Camel has four major brands, which are CAMEL, HUAZHONG,
SWAN, DF. With over 400 types of products covering automotive
starter battery, start-stop battery, lithium-ion battery, traction
battery, etc. Camel batteries are widely used in cars, trucks,
agricultural vehicles, golf carts, electric vehicles and other
applications.
The core competitiveness of Camel Group stems from continuous
independent innovation, clear development strategy and efficient
execution, which are all based on having an enterprising and
innovative management and technical team. To ensure the
technological leadership in the industry, Camel has continuously
increased R&D investment and introduced the world's leading
automatic production lines, and advanced R&D and testing
devices. The professional R&D institute under the company is
recognized as state-level enterprise technology center. Camel also
has academician expert workstation and state-level laboratory. As a
high-tech enterprise supported by the state, Camel has entered the
field of new energy vehicle prospectively, committed to green
energy manufacturing and recycling, and opening a low-carbon life
for mankind.
FAQ
1. Why is the battery voltage abnormal?
A: After charging, the voltage of each single cell should be around 2.1 V (may be affected by electrolyte density). If the voltage is low during primary usage, check if battery is fully charged or if electrolyte density is too high or too low.
If battery shows comparatively higher voltage during charging, along with numerous bubbles and voltage drops fast during discharge, this may indicate plates sulfation. Fully discharge the battery with low current and then charge the battery with low current (0.1C20), repeat the discharge and charge steps several times. The effect of this method may be affected by the sulfation degree.
2. What is the effect of abnormal electrolyte density and indicator color?
A: During battery charging and discharging processes, electrolyte density should vary from 1.070 to 1.290g/cm3. Density increases during charging and decreases when discharging.
a. If density is too high, it will cause plate sulfation and accelerate grid corrosion; while if density is too low, it will affect discharge capacity.
b. Under normal charging conditions, if the density does not increase significantly or even remain unchanged, there is a possibility of plate’s sulfation, which may need countermeasures to eliminate sulfation.
c. After the battery is charged, if the density decreases significantly during the resting period, it indicates the sever battery self-discharge, which may be caused by too much impurities in electrolyte. If electrolyte shows abnormal color or smell, or even shows turbidity, it indicates that the electrolyte is impure and impurities has got into the battery.
d. If electrolyte shows the color of metal ions, there is a possibility of contamination.
