Results forcalibration certificate steel test probefrom 7 Products.
|
CSA C22.2 No. 178-20, Figure 3 steel test probe
|
|
|
|
Wedge probe IEC62368-1-Figure V.4 Reference Standard: IEC62368-1-Figure V.4 Calibration Certificate:Figure V.4 Wedge probe.pdf Technical Parameters: Test finger length 234mm ...
|
|
|
|
Wedge probe , IEC 62368-1 Figure V.4 – Wedge probe According to standard: IEC62368-1 Material :heat-treated steel Length :300mm Width :50mm Bendable Section :30/30/40mm Calibration ...
|
|
|
|
IEC60529 1.0mm Test Wire used for IP4 Code Test with Calibrated Certificate Introduction: Used to verify the protection of persons against access to hazardous parts. Also used to ...
|
|
|
|
ISO17025 Calibrated Test Finger Probe Kits Test IEC61032 Test Probe B Test Probe 12 Test Probe 13 Test Probe 41 The IEC61032 test probe b, test probe 12, test probe 13 and test ...
|
|
|
|
UL498 Plug Socket Tester Stainless Steel Plug Socket Gauge with CNAS logo Calibration Certificate Figure number Description Figure 9.1 Articulate probe with web stop Figure 10.1 ...
|
|
|
|
IEC60065 Test plug for Antenna Coaxial Socket with Third-Lab Calibration Certificate 1. Introduction The test plug is designed according to IEC60065 figure 9, it is applied to test ...
|
|
|