Active Member
|
[China]
Address: No.9 Xiangdun Road,Huaxi Village,Jiangyin City,China
Contact name:Joyce Wang
Jiangyin Bosj Science & Technology Co., Ltd. |
|
|
Automatic Galvanized Steel Cable Tray Cold Roll Forming Machine
Normal Cable Tray Sizes
| No. | Width/mm | Height/mm | Thickness/mm | Length/mm |
| 1 | 150-600 | 50-150 | 0.8-1.5 | Any length |
Cable Tray Roll Forming Machine
| No. | Name | Type and size | Quantity | (KW) Power(kw) |
| 1 | De-coiler | 1 set | ||
| 2 | Straightener | 1 set | 4 | |
| 3 | Servo-feeder | 1 set | 4 | |
| 4 | Punching Press | YANGLI GROUP | 1 set | 25 |
| 5 | Punching Mould | 1 set | ||
| 6 | Conveying Table | 1 set | ||
| 7 | Roll Forming machine | Full automatic control type | 1 set | 15 |
| 8 | Collection table | 1set | ||
| 9 | Electric Control System | 1 set | 7.5 |
1, Equipment capabilities
It can according to the need to produce the steel width (60mm≤§≤860mm), many kinds of specification electric cable bridges and other structure product.
Product speed by punching: 2.55m/min
Continuous rollforming speed: 10-15m/min
Material thickness: 1~2mm
Material require: Q235 cold roll steel
Production line has automatic and manual two operating mode, may realize the linkage and the partition revolution work.
2, Main composition of machine
This unit consists of the decoiler, ML-900 flatting, 200 punch, die, servo feeding, guider, main roll forming machine, follow cutting, cut-to-length part, recoiler, electrical control cabinet; etc.
3.Cable tray roll forming machine uses cantilever type at the two sides, the punch press do the round ribs in bottom or different holes’stamping and cutting. The material is guided into main roll forming machine by guider. By electrical control, automatically improve and adjust different width and height.
Automatic inner tight decoiler | ◊ coil inner diameter 450mm-550mm ◊ maximum width of coiling600mm ◊ maximum weight of loading 2500kg |
Main forming machine | ◊ a. number of forming steps 11rows ◊ material of shaft 45# steel . Outer diameter 60mm ◊ main motor power: 5.5kw ◊ The speed of forming: 0-50m/min |
Hydraulic cutter | ◊ material of blade:Cr12 mould steel with quenched treatment 60-62 ◊ cutting system :adopt advanced hydraulic drive, after forming automatic cut, no distort, no wasting , high safe factor.(tracking cutting) |
The electrical control system | ◊ The Brand of display: DELTA ◊ The main computer (PLC): DELTA DVP14 |
Hydraulic system | ◊ Adopting advanced hydraulic system of Tai Wan ◊ Power:3kw |
The equipments coating , package | ◊ the coating adopt international general shade-guide ◊ The package :simple waterproof package |
4,Machine Parameter
| NO. | Project | Unit | Parameter | Remark | |
1 | Material | Type | High strength steel | ||
| Strength of material sheet | Map | ≥350 | |||
| Thickness of material sheet | mm | 1.2~2.0 | |||
| 2 | Size of production | mm | Reference the picture | ||
| 3 | Production speed | m/min | Punching speed 4m/min Forming speed 10m/min | ||
| 4 | Material of roller | GCr15 quenching treatment | |||
| 5 | Drive type | Gear | |||
| 6 | Power | kw | About 75 | ||
| 7 | Electric control system | PLC variable frequency control | |||
| 8 | Dimensions(Length*width*height) | m | 55X4X3.9 | ||
Service from BOSJ
BOSJ offer engineers to install and commision the machines at buyer's factory,and also train your workers to operate the machine.
Guarantee: one year after finishing machine installation and commission at buyers' factory.
24 hours response time
a) Mechnical engineering team with 10 actual working experience
b)Electrical engineering team with 10 actual working experience
