Home Companies Shenzhen Bwin Precision Tools Co., Ltd.

PVD Coating Insert Ccmt 09t304

Active Member

Contact Us

[China]

Address: No.1613, honghai Bldg., Songgang Rd., Baoan Area ,Shenzhen , China

Contact name:Judy Le

Shenzhen Bwin Precision Tools Co., Ltd.

PVD Coating Insert Ccmt 09t304

Country/Region	china
City & Province	shenzhen

Product Details

Ccmt 09t304 060204 09t308 Tungsten Carbide Insert 120404 120408 Internal Cutting Tool

Quick Detail:

Alloy material
Good heat resistance
High bending strength
High processing finish
High stability
high-precision

Description:

tungsten carbide inserts turning is made of high-quality hard alloy material, which is not easy to rust and is durable.
The tungsten carbide inserts is hard and sharp, with faster cutting speed and higher efficiency.
Suitable for turning and finishing steel, stainless steel, cast iron and non-ferrous materials.
80 ° diamond single-sided blade with chipper, 10 pieces of cemented carbide blades in plastic box, easy to store.

Specifications:

Brand	BWIN
Model	Ccmt09t304 Ccmt09t302 Ccmt060202 Ccmt060208
Color	Yellow/Fuchsia/Black//Two-color coating/Cermet coating/Brown
Workpiece	Cast iron/Steel/Stainless steel/Aluminum
Type	Internal Turning Tool
Material	Tungsten Carbide Inserts
Processing Type	Medium Cutting
Feature	High Strength
	Good Heat Resistance
	High Processing Finish
	High Finish Polished
	High Stability
Standard	ISO
Quantity	10pcs/box
Weight	0.015kg
Package	Plastic Box
Customized Support	OEM, ODM

Lead Time:

antity(pieces)	1 - 3000	>3000
Lead time (days)	7	To be negotiated

Ccmt 09t304 060204 09t308 Tungsten Carbide Insert 120404 120408 Internal Cutting Tool

I(mm)	d(mm)	t(mm)	d1(mm)
06	6.35	2.38	2.8
09	9.525	3.97	4.4
12	12.7	4.76	5.5

Notice:

The tungsten carbide inserts shall not be collided or dropped on the ground and must be handled with care.
Before installing the carbide blade, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
After installation, it is necessary to confirm whether the central hole of the carbide blade is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
When using, do not exceed the specified high speed
When the tungsten carbide inserts is not used, hang the blade vertically on the dry shelf.

Applications:

Our tungsten carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following:

Ccmt 09t304 060204 09t308 Tungsten Carbide Insert 120404 120408 Internal Cutting Tool

FAQ

1. Flank Wear? Higher cutting resistance,Notch wear on flank,Poor roughness of surface, or deterioration of accuracy.

Soft grades,Excessive cutting speed,Small flank angle,Low feed.

Select a higher,wear-resistant grade,Reduce cutting speed,Increase flank angle,Increase feed.

2. Crater Wear? Uncontrolled chip,Poor surface quality,when finishing High speed processing carbon steel

Soft grades,Excessive cutting speed,Excessive feed,The strength of chip breaker Insufficiet.

Change to a higher wear-resistant grade,Reduce cutting speed,Reduce feed,Select a higher strength chip breaker.

3. Chipping? Sudden fracture of cutting edge(rake face and flank),Instability insert life

Toughness insufficient,Excessive feed rate,Strength of cutting edge insufficient,Instability of the tool.

Select a tougher grade,Decrease feed rate,Increase honing of cutting edge(chamfering to rounding),Increase the stability and setting angle

4. Insert Fracture? Cutting resistance increased Poor surface roughness.

Toughness insufficient,Excessive feed rate,Strength of cutting edge insufficient,Instability of the tool.

Select a tougher grade,Decrease feed rate,Increase honing of cutting edge(chamfering to rounding),Increase the stability and setting angle.

5. Plastic Deformation? Variation of dimension Nose wear,cutting edge drape or passivating.when processing alloy steel Poor surface roughness

Soft grade,Excessive cutting speed,Excessive cutting depth and feed rate,Overheat on cutting edge.

Select a higher red hardness cutting material,Decrease cutting speed,Decrease cutting depth and feed rate,Select a higher thermal conductivity cutting material(CVD+sufficient coolant).

6. Build-Up-Edge? Workpiece dissove with Cutting edge Poor surface roughness when finishing,Cutting resistance increased,Cutting soft materials.

Cutting speed too low,Cutting edge obtuse,Unsuitable tool material. Increase cutting speed,Increase rake angle,Select small sticking force.