Home Companies Shenzhen Bwin Precision Tools Co., Ltd.

Vnma 160412 Turning Carbide Inserts Cast Iron Carbide Lathe Inserts

Active Member

Contact Us

[China]

Address: No.1613, honghai Bldg., Songgang Rd., Baoan Area ,Shenzhen , China

Contact name:Judy Le

Shenzhen Bwin Precision Tools Co., Ltd.

Vnma 160412 Turning Carbide Inserts Cast Iron Carbide Lathe Inserts

Country/Region	china
City & Province	shenzhen

Product Details

Cnc Turning Carbide Inserts Tungsten Lathe Cutter Cast Iron Vnma 160404 160408 160412

Quick Detail:

Precision coating
High durability
Fine cutting
Good chip removal performance
Low friction coefficient
Resistance to deformation

Description:

The turning carbide inserts are sintered from tungsten carbide and cobalt powder. The base material with strong deformation resistance and carbide with special crystal structure enable the tool to have high hardness, good toughness and high temperature resistance, making the wear resistance of the rear face of the tool stronger; Unique coating process, fine and smooth, no drip marks, reduce surface friction, so that the cutting resistance is smaller; The cutting edge is sharp and smooth, with good toughness, durable wear resistance, and cost-effective.

Specifications:

Brand	BWIN
Model	VNMA160404 VNMA160408 VNMA160412
Color	Black
Workpiece	Cast iron
Type	CNC Tool
Material	CNC Carbide Turning Inserts
Processing Type	Medium Cutting
Feature	Precision coating
	High durability
	Fine cutting
	Good chip removal performance
	Good toughness
Standard	ISO
Quantity	10pcs/box
Weight	0.015kg
Package	Plastic Box
Customized Support	OEM, ODM

Lead Time:

antity(pieces)	1 - 3000	>3000
Lead time (days)	7	To be negotiated

Cnc Tungsten Carbide Insert Cnmg 120404 120408 120412 Lathe Turning Cutting Tool

I(mm)	d(mm)	t(mm)	d1(mm)
16	9.525	4.76	3.81

Notice:

1. Be careful not to mix two or several turning carbide inserts together;

2. Pay special attention to the protection of the cutting edge; Never touch or fall on the ground;

3. Pay attention to rust prevention, and then pay attention to whether the locking screw is loosened when adjusting;

4. When using the turning carbide inserts, if there is screw anti seize agent, it must be added to prevent the screw from sticking;

5. Assume that the turning carbide inserts encounters rust; It is not recommended to use abrasive paper or other rough grinding. It is recommended to purchase a polishing agent specially used for polishing. The particles are fine, much like toothpaste, which will cause less damage to the taper part of the turning carbide inserts, and the polishing is smooth.

Applications:

Our turning carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following:

Cnc Tungsten Carbide Insert Cnmg 120404 120408 120412 Lathe Turning Cutting Tool

FAQ

1. Flank Wear? Higher cutting resistance,Notch wear on flank,Poor roughness of surface, or deterioration of accuracy.

Soft grades,Excessive cutting speed,Small flank angle,Low feed.

Select a higher,wear-resistant grade,Reduce cutting speed,Increase flank angle,Increase feed.

2. Crater Wear? Uncontrolled chip,Poor surface quality,when finishing High speed processing carbon steel

Soft grades,Excessive cutting speed,Excessive feed,The strength of chip breaker Insufficiet.

Change to a higher wear-resistant grade,Reduce cutting speed,Reduce feed,Select a higher strength chip breaker.

3. Chipping? Sudden fracture of cutting edge(rake face and flank),Instability insert life

Toughness insufficient,Excessive feed rate,Strength of cutting edge insufficient,Instability of the tool.

Select a tougher grade,Decrease feed rate,Increase honing of cutting edge(chamfering to rounding),Increase the stability and setting angle

4. Insert Fracture? Cutting resistance increased Poor surface roughness.

Toughness insufficient,Excessive feed rate,Strength of cutting edge insufficient,Instability of the tool.

Select a tougher grade,Decrease feed rate,Increase honing of cutting edge(chamfering to rounding),Increase the stability and setting angle.

5. Plastic Deformation? Variation of dimension Nose wear,cutting edge drape or passivating.when processing alloy steel Poor surface roughness

Soft grade,Excessive cutting speed,Excessive cutting depth and feed rate,Overheat on cutting edge.

Select a higher red hardness cutting material,Decrease cutting speed,Decrease cutting depth and feed rate,Select a higher thermal conductivity cutting material(CVD+sufficient coolant).

6. Build-Up-Edge? Workpiece dissove with Cutting edge Poor surface roughness when finishing,Cutting resistance increased,Cutting soft materials.

Cutting speed too low,Cutting edge obtuse,Unsuitable tool material. Increase cutting speed,Increase rake angle,Select small sticking force.