|
[China]
Trade Verify
Address: Building 30, No.58 Xiuxi Road, Wuxi City, Jiangsu Province, China.
Contact name:Zhang
Wuxi Bewis Sensing Technology LLC |
|
Verified Suppliers
|
|
|
BWH515 CAN Bus Single-Axis High-Precision Inclinometer Accuracy 0.003° Platform Leveling Construction Machinery
Introduction:
It is suitable for inclination measurement in industrial automation, surveying and mapping and other industries. It adopts MEMS technology and can output. The measurement range is ± 30 °, and the accuracy is up to 0.003 °. It is a high cost-effective product. This product adopts the principle of non-contact measurement and directly outputs the current attitude angle through digital mode. It has strong resistance to external electromagnetic interference and vibration impact.
Performance Index:
Measurement range (°) | Condition | ±30 | ±30 |
| Measurement axis | X | X | |
| Accuracy(°) | Highest | 0.003 | 0.005 |
| Resolution(°) | Completely still | 0.0007 | 0.0007 |
| Zero bias (°/℃) | -40~85℃ | ±0.0007 | ±0.0007 |
| Start-up time | ＜3s | ＜3s | |
| Output frequency (Hz) | 5-100Hz adjustable | Up to 100 | Up to 100 |
| Mean time between failures MTBF | ≥90000 hours | ||
| Electromagnetic compatibility | According to GBT17626 | ||
| Insulation resistance | ≥100 MΩ | ||
| Impact resistance | 2000g,0.5ms,3times/axis | ||
Application:
● Bridge and dam monitoring
● Railroad Gauge Ruler Leveling
● Surveying and mapping
● Lifting equipment inclination control
BWSENSING's Accuracy Traceability System:
Company introduction
Wuxi Bewis Sensing Technology LLC(BWSENSING) is an innovative fast growing company established in 2010. The company was born in The Institute of Microelectronics (IME) of Peking University. We have achieved the top spot in the middle and high-end industry applications in the Chinese market.
From 2019, BWSENSING ® is approved as our global brand.With 10 years experience in the research-design-development and manufacture of a range of Inertial sensor technology, BWSENSING posses the skills, knowledge and experience to provide fully integrated OEM/ODM design and manufacturing services for Inclinometer, Electronic Compass, IMU, AHRS, GNSS/INS and Fiber Optic Gyroscope. As the company co-founder Dr. Guangyi Shi said, we will use the Accurate and Cost-effective sensors to make a greater contribution to the global society for a better IoT world.
FAQ
Q1: Accuracy definition of products
A: RMS accuracy, the accuracy of each product can be traced.Accuracy test report can be provided if required.
Q2: How to select suitable model?
A: Users should check the following points:
a. Single or dual axis?
b. Commom protocol, Modbus or CAN?
c. Dynamic or static Application scenarios?
d. Horizontal or vertical installation?
Q3: How to purchase?
A: If you want sample, please purchase on BWSENSING online shop. We accept Paypal/TT/CC.If you purchase in bulk, it is recommended to consult the sales for the best price.
Q4: How long is the warranty period?
A: One year.
Q5: Fast troubleshooting for CAN products that cannot communicate
1. Firstly, the sensor's power supply voltage is determined according to the label of the sensor, and the output mode is wired according to the corresponding interface mode, and the corresponding protocol is used;
2. Use a multimeter to check the power supply voltage to ensure that the power supply is normal;
3. Configure the serial port parameters for communication, set the correct product address (normal protocol factory default 00, Modbus protocol factory default 01), select the correct baud rate (default 9600), open the computer device manager to confirm that the COM port number is selected correctly;
