|
Trade Verify
Address: No2. Weibei Industrial Area, Yudai Road, Weitang Town, Xiangcheng District, Suzhou, China
Contact name:Lucy Shi
Suzhou Meilong Rubber and Plastic Products Co., Ltd. |
|
Verified Suppliers
|
|
|
FKM/FPM Epdm Seat Butterfly Valve , 1 - 54 Inch Wastewater Pipe Seal Seat
Description of Fluororubber
1. Basic features:
1.1 Excellent heat resistance, even at 200 °C, it does not change.
1.2 Excellent weather resistance and ozone resistance.
1.3 Oil resistance and chemical resistance are very good.
1.4 Excellent corrosion resistance.
1.5 The gas permeability is low, the gas solubility is large, but the diffusion speed is small.
1.6 Flame resistance increases with increasing fluorine content and is self-extinguishing rubber.
1.7 Lack of cold resistance.
1.8 Expensive.
2. Scope of application: It is used in modern aviation, missiles, rockets, space navigation, ships, atomic energy and other rigid technologies and industrial sectors such as automobiles, shipbuilding, chemicals, petroleum, telecommunications, instrumentation machinery. Products include seals, gaskets, films, protective clothing, etc., as well as sealants, coatings, linings, seals, etc. for hoses, wires and cables.
Technical Capacity:
Project Engineering Group and Technical Group.
R&D Capabilities: Our experts group can provide all-round supports to products and mold design, material formula and process optimization.
Independent Physics Laboratory and High-Standard Quality Inspection.
Implement project management system to ensure smooth transfer and constant improvements from project lead-in to mass production.
Material Quick Selection Table:
| Material | Suitable Temp. | Characteristics |
| NBR | -35℃~100℃ Instant -40℃~125℃ | Nitrile rubber has good self-expanding properties, abrasion resistance and hydrocarbon-resistant properties. It can be used as a general material for water, vacuum, acid, salt, alkali, grease, oil, butter, hydraulic oil, glycol, etc. Can not be used in places such as acetone, ketone, nitrate, and fluorinated hydrocarbons. |
| EPDM | -40℃~135℃ Instant -50℃~150℃ | Ethylene-propylene rubber is a good general-purpose synthetic rubber that can be used in hot water systems, beverages, dairy products, ketones, alcohols, nitrates, and glycerin, but not in hydrocarbon-based oils, inorganics, or solvents.
|
| CR | -35℃~100℃ Instant -40℃~125℃ | Neoprene is used in media such as acids, oils, fats, butters and solvents and has good resistance to attack. |
| FKM | -20℃~180℃
| Fluororubber is a good hydrocarbon-resistant base oil, fluorinated hydrocarbon rubber for oily gas and other petroleum products. It is suitable for water, oil, air, acid and other media, but it can not be used for steam, hot water or thicker than 82 °C. Alkali system. |
| SR | -70℃~200℃ | Silicone rubber is resistant to high temperature, low temperature and stable chemical properties, and is widely used in industries such as strong acid, weak alkali and food. |
Special materials: carboxylated nitrile rubber, hydrogenated nitrile rubber, corrosion-resistant ethylene-propylene rubber, steam-resistant fluoroelastomer, chlorosulfonated polyethylene | ||
