PTFE+EPDM / PTFE+FKM rubber valve seat For Centerlined Butterfly
Valve
General Information:
- Type: PTFE Composite rubber butterfly valve seat
- Material: PTFE+EPDM / PTFE+FKM
- Certification: FDA, REACH, ROHS, EC1935
- Performance: Good resistance to high temperature, acid and alkali,
Good resilience
- Color: Black, green
- Size range: DN50(2inch) ~ DN600(24 inch)
SML rubber valve seat introduction:
- A butterfly valve seat is a type of flow control devise, typically
used to regulate o fluid flowing through a section of pipe.
- Rubber Valve seats are used in Butterfly valves for sealing
purpose. The material of the seat can be made from many different
elastomers or polymers, including PTFE, NBR, EPDM, FKM/FPM, etc.
- The Teflon (PTFE) liner overlays EPDM/ FKM which is bonded to a
rigid phenolic ring on the outside seat perimeter. The PTFE extends
over the seat faces and outsides flange seal diameter, completely
covering the EPDM/ FKM elastomer layer of the seat, which provides
the resilience for sealing valve stems and the closed disc.
- Temperature range: -10°C to 150°C.
- OEM accepted.
Rubber seat Dimensions (Unit:lnch/mm)
Inch | 1.5“ | 2“ | 2.5“ | 3“ | 4“ | 5“ | 6“ | 8“ | 10“ | 12“ | 14“ | 16“ | 18“ | 20“ | 24“ | 28“ | 32“ | 36“ | 40“ |
DN | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 700 | 800 | 900 | 1000 |