Active Member
|
[China]
Address: NO 123 Suzhou Dadao East Road Suzhou Jiangsu China
Contact name:Tina
Suzhou Kiande Electric Co.,Ltd. |
|
|
Customized Automatic Busbar Machine For HV Withstanding Test
Function introduction
Automatic inspection machine is composed of three parts, feeding positioning station, inspection station and discharge station. When the busbar enters the feeding position, the control system will select the right testing fixture to start testing from the information identified by bar code or previous assembly line. Three tests will be performed including HV withstanding test, insulation resistance test and grounding test. After test is finished, testing report will be generated. This report can be saved, printed on site and recorded remotely. Its format can be set according to customer’s requirements. Automatic inspection machine is mainly used for batch inspecting on the straight busbar. Elbow busbar type shall be tested on manual inspection machine.
| No. | Parameters |
| Model | KD-JCX/NC-E/H-6 |
| Busbar Height | 100mm~650mm |
| Busbar Length | 1200mm~6000mm |
| Busbar Type | Straight length type |
| Position Type | Unilateral / Middle |
Working Efficiency | 2 min/piece(testing time is adjustable.) |
| Servo Nos | 2 axis( Z axis/X axis) |
Vision System | Phase error judgment ( optional) |
Printing System | Bar code printing / Report printing( optional) |
High Voltage Withstanding Test | 0~5000V |
| Insulation Test | 1~1000V |
| Grounding Test | 0~25A |
Power | 380~415VAC 50~60Hz 5kW |
| Equipment Dimension | L12000mm*W1200mm*H1900mm |
Feature
Customized
testing report can be saved, printed on site and recorded remotely.
Its format can be set according to customer’s requirements.
Fuction
HV withstanding test, insulation resistance test and grounding test
