|
[China]
Trade Verify
Address: Room 336, Building A, Yingfeng NO1192, Zhongshan Avenue Middle, Tianhe District
Contact name:Paul liu
Guangzhou Bulldog Mechanical Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Parts list
| D155A-5 BLADE LIFT CYLIND | |||
| Item | Part No. | Part Name | Qty |
| G-1 | ( 707-02-X7440) | CYLINDER GROUP,L.H. (FINAL COATING) | 1 |
| ( 707-02-X7150) | CYLINDER GROUP,L.H. (FINAL COATING) | 1 | |
| G-2 | ( 707-02-X7450) | CYLINDER GROUP,R.H. (FINAL COATING) | 1 |
| ( 707-02-X7160) | CYLINDER GROUP,R.H. (FINAL COATING) | 1 | |
| 707-02-00340 | CYLINDER ASS'Y | 1 | |
| 17A-63-02110 | CYLINDER ASS'Y | 1 | |
| 1 | 175-63-22540 | CYLINDER | 1 |
| 2 | 175-63-12540 | BUSHING | 2 |
| 3 | 707-29-12370 | HEAD,CYLINDER | 1 |
| 707-29-12860 | HEAD,CYLINDER | 1 | |
| 4 | 707-52-90520 | BUSHING | 1 |
| 707-52-10750 | BUSHING | 1 | |
| 5 | 707-51-75030 | PACKING,ROD (KIT) | 1 |
| 707-51-75211 | PACKING,ROD (KIT) | 1 | |
| 5A | 707-51-75640 | RING,BUFFER (KIT) | 1 |
| 6 | 144-63-94170 | SEAL,DUST (KIT) | 1 |
| 7 | 07179-13089 | RING,SNAP | 1 |
| 8 | 07000-12115 | O-RING (KIT) | 1 |
| 9 | 07146-02116 | RING,BACK-UP (KIT) | 1 |
| 10 | 07000-02120 | O-RING (KIT) | 1 |
| 11 | 175-63-22520 | ROD,PISTON | 1 |
| 12 | 707-66-75020 | CAP | 1 |
| 13 | 707-88-15010 | SHIM, 1.0MM | 10 |
| 14 | 01011-81805 | BOLT | 4 |
| 15 | 707-41-11840 | WASHER | 4 |
| 175-63-22530 | PISTON ASS'Y | 1 | |
| 16 | 707-37-12010 | PISTON | 1 |
| 17 | 707-83-10270 | VALVE,(L=77.5MM) | 2 |
| 707-83-10260 | VALVE,(L=80.5MM) | 1 | |
| 707-83-10280 | VALVE,(L=74.5MM) | 1 | |
| 18 | 707-84-10240 | SEAT | 8 |
| 19 | 07000-12055 | O-RING (KIT) | 1 |
| 20 | 07001-02055 | RING,BACK-UP (KIT) | 2 |
| 20A | 707-40-12050 | RETAINER | 1 |
| 21 | 707-44-12180 | RING,PISTON (KIT) | 1 |
| 22 | 707-39-12110 | RING,WEAR (KIT) | 2 |
| 23 | 707-40-12170 | SPACER | 2 |
| 24 | 707-83-10073 | VALVE | 4 |
| 25 | 01252-31235 | BOLT | 6 |
| 26 | 17A-54-11521 | HOOK | 1 |
| 27 | 01010-51245 | BOLT | 1 |
| 28 | 01643-31232 | WASHER | 1 |
| 17A-63-14100 | VALVE ASS'Y,QUICK DROP | 1 | |
| 29 | BODY | 1 | 65001- |
| 30 | VALVE | 1 | 65001- |
| 31 | VALVE | 1 | 65001- |
| 32 | 195-63-14180 | SPRING | 1 |
| 33 | 01642-21216 | WASHER | 1 |
| 34 | 195-63-14162 | COLLAR | 1 |
| 35 | 07000-12055 | O-RING (KIT) | 1 |
| 36 | 01011-51615 | BOLT | 2 |
| 37 | 01643-31645 | WASHER | 2 |
| 38 | 17A-63-12170 | TUBE,L.H. | 1 |
| 17A-63-12270 | TUBE,R.H. | 1 | |
| 39 | 07000-13030 | O-RING (KIT) | 1 |
| 40 | 01010-50840 | BOLT | 2 |
| 41 | 01010-50855 | BOLT | 2 |
| 42 | 01643-30823 | WASHER | 4 |
| 43 | 17A-63-12180 | TUBE,L.H. | 1 |
| 17A-63-12280 | TUBE,R.H. | 1 | |
| 44 | 07000-13048 | O-RING (KIT) | 1 |
| 45 | 01010-51275 | BOLT | 5 |
| 46 | 01643-31232 | WASHER | 5 |
| 47 | 07000-13038 | O-RING (KIT) | 2 |
| 48 | 07000-13045 | O-RING | 1 |
| 49 | 01010-51065 | BOLT | 4 |
| 50 | 01643-31032 | WASHER | 2 |
| 51 | 07282-12793 | CLAMP | 1 |
| 52 | 01010-51020 | BOLT | 2 |
| 53 | 01643-31032 | WASHER | 2 |
| 707-99-44180 | SERVICE KIT | 2 | |
| 707-98-44200 | SERVICE KIT | 2 | |
Parts exploded view
More service models
| D65E-12 | |||||||
| LIFT | 14X-63-01063 | 65 mm | 95 mm | KOM-707-98-28600 | |||
| 14X-63-01063 | 65 mm | KOM-707-52-10660 | |||||
| LIFT (TRIMMING) | 14X-63-07011 | 65 mm | 95 mm | KOM-707-98-28600 | |||
| 14X-63-07011 | 65 mm | KOM-707-52-10660 | |||||
| 14X-63-07012 | 65 mm | 95 mm | KOM-707-98-28600 | ||||
| 14X-63-07012 | 65 mm | KOM-707-52-10660 | |||||
| RIPPER | 14X-63-01052 | 70 mm | 140 mm | KOM-707-98-52130 | |||
| 14X-63-01052 | 70 mm | KOM-707-52-10700 | |||||
| TILT | 14Y-63-01032 | 70 mm | 140 mm | KOM-707-98-52140 | |||
| 14Y-63-01033 | 70 mm | 140 mm | KOM-707-98-52140 | ||||
| 707-01-0C300 | 70 mm | 140 mm | KOM-707-98-52210 | ||||
| 707-01-0C301 | 70 mm | 140 mm | KOM-707-99-52160 | ||||
| TRIMMING LH | 14X-63-07030 | 55 mm | 120 mm | KOM-707-98-40020 | |||
| 14X-63-07030 | 55 mm | KOM-07177-05530 | |||||
| TRIMMING RH | 14X-63-07040 | 55 mm | 120 mm | KOM-707-98-40020 | |||
| 14X-63-07040 | 55 mm | KOM-07177-05530 | |||||
Company warehouse
FAQ
1. Q: Are you a manufacturer or trader?
A: We are both in manufacturer and trader, have more than 10 years
of industry experience.
2. Q: Can i make a small order first?
A: Yes, of course.
3. Q: If we let the product make a change of the size, can you
offer the
seal kit for this size?
A: Yes, just send the machine model, part number and the change
of size to us, we can make it.
4. Q: Have you support the OEM or not?
A: Sure, we support the OEM,BULLDOG or as required.
5. Q: How can i pay the goods?
A: For the payment, we support the PayPal, Western Union, Money Gram, T/T in advance, L/C at sight, etc
6. Q: How to ship the products?
A: For the shipment, we support the DHL Fedex EMS UPS or by Air/ Sea., if you have the agent in china, we can contact your agent according to your request.
7. Q: What’s the delivery time?
A: The goods can be shipped at 2-5 working days after receiving payment.
