VIIPLUS INTERNATIONAL |
|
The mold guide column bronze Gleitlager bushings play a crucial role in the precision and stability of injection molding machine mold frames. These bushings are designed to provide smooth and reliable sliding motion for the mold guide columns, ensuring accurate alignment and positioning of the mold halves during the molding process.
The bronze alloy material of the Gleitlager bushings offers excellent strength, durability, and corrosion resistance. This ensures that the bushings can withstand the rigorous operating conditions of injection molding machines, including high pressures, temperatures, and repeated cycling.
The Gleitlager bushings are precision-engineered to fit the mold guide columns precisely, ensuring minimal clearance and maximum stability. This reduces wear and tear on the mold guide columns, prolonging their service life and reducing maintenance costs.
The smooth sliding motion provided by the Gleitlager bushings also contributes to improved mold closing accuracy. This ensures that the mold halves are precisely aligned, resulting in higher-quality molded parts with reduced defects and waste.
In addition, the Gleitlager bushings are often equipped with self-lubricating features, such as graphite inserts or oil grooves. This eliminates the need for frequent lubrication, reducing downtime and maintenance requirements.
Overall, the mold guide column bronze Gleitlager bushings are essential components of injection molding machine mold frames. They provide smooth and reliable sliding motion, improved mold closing accuracy, and reduced maintenance costs, ensuring efficient and productive molding operations.
VSB-JDB-4 Graphite grey cast iron bearing cast iron inlaid bearing is a new product based on HT250 embedded solid lubricant, which is
a typical material saving product.If the pressure < 14.5n /mm2
or mechanical performance requirements, can be used as a substitute
for chb-jdb-2 material.Can greatly reduce the cost, meet the use
requirements.For example, the mold guide column, injection molding machine mold frame and other fields can be used.
HT250 | ||||
C(%) | Si(%) | Mn(%) | S(%) | P |
3.16~3.30 | 1.79-1.93 | 0.89~1.14 | 0.094~0.125 | 0.120~0.170 |
Grey cast iron has good casting performance, good vibration
absorption, good wear resistance, good cutting performance and low
notch sensitivity.
The influence factors of the properties of grey cast iron the
influence of chemical composition.Production is mainly controlled
by the mass fraction of carbon and silicon.With low carbon and
silicon content, the cast iron is prone to white microstructure,
and its mechanical properties and casting properties are very low.
When the mass fraction of carbon and silicon is too high, the
graphite sheet is too much and too thick, and even graphite floats
on the surface of molten iron, which reduces the performance and
quality of the casting.
Therefore, the content of carbon and silicon in gray cast iron is
generally controlled at 2%~ 4%C.1.0% ~ 2.0% Si;0.5% ~ 1.4% Mn.
Influence of cooling speed: in a certain casting process, the cooling speed of the casting has a great impact on the degree of
graphite.With the increase of the wall thickness, the cooling rate of the
castings slows down and the carbon atoms have sufficient diffusion
time, which is conducive to the graphitization process and the
gray-iron structure can be easily formed at room
temperature.However, thin-walled parts in the cooling process of
cooling too fast, easy to form a white iron.
Substrate material | HT250 | Maximum operating temperature ℃ | 400 |
Ultimate dynamic load N/mm² | 60 | ||
Friction coefficient u | <0.18 | Maximum sliding speed m/s | 0.5 |
Basic hardness HB | 180~230 |
VSB-JDB-1 | VSB-JDB-2 | VSB-JDB-3 | VSB-JDB-4 | VSB-JDB-5 | |||
---|---|---|---|---|---|---|---|
VSB-JDB-2 | VSB-JDB-22 | VSB-JDB-23 | |||||
GB1776-87 | ZCuZn25 Al6Fe3Mn3 | ZCuSn6Zn6Pb3 | ZCuAl10Fe3 | ZCuSu10P1 | Steel+ ZCuSn6Zn6Pb3 | HT250 | GCr15 |
ISO1338 | GCuZn25 Al6Fe3Mn3 | GCuSn6Zn6Pb3 | GCuAl10Fe3 | - | Steel+ CuSn6Zn6Pb3 Fe3Ni5 | - | B1 |
DIN | G-CuZn25 Al5 | GB-CuSn5Zn5Pb5 | GB-CuAl10Ni | GB-CuSn10 | Steel+ CuSn6Zn6Pb3Ni | - | 100Cr6 |
JIS | HBsC4 | BC6 | AIBC3 | BC3 | BC6 | FC250 | SUJ2 |
ASTM/UNS | C86300 | C83600 | C95500 | C90500 | C83600 | Class40 | 52100 |
(BS) | HTB2 | LG2 | AB1 | PB4 | LG2 | - | - |
VIIPLUS is recognized as the supplier in pipe handling self-lubricating bearing manufacturing equipment, our sliding bearing bushing product range
includes equipment for a wide variety of customers.
straight or flange