Bottle filler
24 head filling as a reference 1)Adopted Germany anti-corrosion
non-maintaining bearing that can reduce the pollution of filling to
the environment. 2)The pressure mechanical valve is introduced the
advanced foreign design with a fast filling speed, no hygiene
corner pocket, a few sealing parts, and precise liquid level
control. The whole valve is made of 304 stainless steel. 3)The
filling system has a CIP circulation system to wash the pipeline
and filling valves. This system can clean the liquid pipe, liquid
tank and filling valve etc. effectively. 4)The filling valve opens
and begins filling when it moves down and touches the bottleneck,
the filling valve move up and leave the bottleneck when it finishes
filling. 5)The liquid supply adopts the automatic pneumatic valve
magnetic liquid-level switch to control the liquid tank
automatically. 6)The motivation of the filler is derived from the
driven system in the framework and passed by gear.
Screw capper:
This unit is the highest degree of accuracy of 3 in 1 machine, it
is important for the machine to run stably and the product
quality.Characteristic of the screwing capper as follows: 1)
Screwing capping head (the main parts which can assure the capping
quality), the expert improve the design of magnetic steel, this
improvement can reduce the defective rate of capping better and the
traditional character of easy to set and adjust the torque of
screwing capping head. 2) The screwing capping head is dual-purpose
design; it is suitable for flat cap and sport cap. 3) The device
which can take out the reverse cap and prevent the reverse cap
passing is settled in the cap-falling guide. Passing by cap loading
system. 4) A group of photoelectric switches are settled on
cap-falling guide. The machine will stop when there is no cap on
the guide. 5) A bottle inlet detect switch is settled on the
screwing capper. 6) There is a cap-lock cylinder in the joint
between the cap-falling guide and poking cap plate. It is realize
that no feeding no cap. 8) By adjusting the height of the rotary
parts to adapt for different bottle height. 9) The motivation of
the screwing capper is derived from the driven system in the
framework and passed by gear. 10) The main parts of the screwing
capper are processed by the digital-control processing center.
Capacity (B/H) | 6000B/h(500ml) |
Filling range | 3-10L |
Bottle size | Diameter Φ50mm-Φ90mm Height 165mm-310mm |
Filling accuracy | ±5mm |
Compressing air | 3m3/h |
Water | 1.5T/h |
Power(kw) | 4KW |
Weight(kg) | 3000KG |
Dimension(L*W*H) | 2900mm*2100mm*2400mm |
Transducer | Mitsubishi | FL-2.2K |
Touch screen | Easyview-TaiWan | MT6070 |
PLC | Mitsubishi | FXIS-20MR |
Stabilized voltage supply | MingWei-TaiWan | S-35-24 |
Contactor | Schnider | CJX2-0910 |
Approach switch | Autonics | PR18-8DN |
Air switch | Schnider | 3P-D20 |
| | IP-C3 |