Taizhou Huyang Reliable Machinery Co.,Ltd |
|
10L Juice Drinks Water PET Bottle Blowing Machine Low Power Semi-Automatic
Specifications
1. CE Certificate
2. Different Shape Bottle
3. Double/Single Statio
Parts item:
1. Exploded bottles ejection unit
During the blowing process, if the bottle burst, it can be automatically removed. This prevents the bad bottles into the filling machine.
2. HP air recovery system
After the bottle blowing accomplished, high-pressure air can be recycled can be used again for the pre-blowing and operational movement.
3. Oven and preform temperature detection system
Real-time detect the temperature of the oven and the temperature of the preform after
heating before blowing. When the preform heating temperature does not reach the set blowing temperature blowing workstation will alarm, not blown.
Advantage
1.Stable performance with advanced PLC.
2.Conveying preforms automatically with conveyor.
3.Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4.High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area and eternal temperature in the preheater with an automatic thermostatic apparatus.
5.High safeties with security automatic-locking apparatus in each mechanical action,which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
Introduction
1.The bottle blowing machine is used for PET water bottle, hot filling bottle, steam drink bottle, edible oil bottle, pesticide bottle and so on.
2.Bottle blowing machine adopts servo control system, which has the characteristics of stable and reliable structure, fast and stable, easy to maintain, convenient and convenient for mould, and meets the need of continuous production on-line.
3.Touch screen control and temperature adjustment make it easy to blow different bottle type temperature regulation.
4.Its servo transmission system has high positioning accuracy, fast and stable speed, good reliability, no gas source saving energy, low maintenance cost, and the tension rod is controlled by servo motor.
Main Technical parameters | |||
TYPE | ITEM | UNIT | RM-6L |
MOULDING | Clamping Force | kg | 25000 |
Clamping Stroke | mm | 215 | |
Cavity Spacing | mm | 25000 | |
Mould opening stroke | mm | 300 | |
Number of Cavity | cavities | 1-2 | |
Theoretical Output | bph | 400-800 | |
AIR COMPRESSOR | High pressure compressor | Itr/ min | 1200 |
Low pressure compressor | Itr/ min | 600 | |
MAIN MACHINE ELECTRICITY | power | KW | 18 |
Voltage/Frequency | V/Hz | 380-240-110/50-60(3-phase) | |
MACHINE SIZE AND WEIGHT | Main machine(L×W×H) | mm | 1900*650*1800 |
Main machine weight | kg | 750 | |
Heater(L×W×H) | mm | 1700*670*1600 | |
Heater weight | kg | 350 |
Brand List
Electrical components | Cylinders | ||
PLC | Taiwan Delta | clamping cylinder | Japan SMC |
touch screen | Taiwan Delta | stretching cylinder | Japan SMC |
relay | France Schneider | preform-feeding flipping cylinder | Germany FESTO |
circuit breaker | France Schneider | bottle-takeout flipping cylinder | Germany FESTO |
air switch | France Schneider | first-stage, second-stage slide cylinder | Japan SMC |
power supply | France Schneider | heating cylinder | Japan SMC |
proximity switch | France Schneider | Preform-separating cylinder | Japan SMC |
photoelectric switch | France Schneider | Manipulator cylinder | Japan SMC |
Air Filtration | valves | ||
low pressure oil-water separator | Germany FESTO | high pressure exhaust valve | USA PARKER |
low pressure press-regulating valve | Germany FESTO | high pressure one-way valve | Germany FESTO |
low pressure lubricator | Germany FESTO | low pressure operating valve | Japan SMC |
high pressure blowing valve | USA PARKER |
How to get your suitable machine or production line ?
• Find our products through Reliable Machinery Co.,Ltd in Google ,Baidu. Bing ,Yahoo, Alibaba.com etc
• Enquiry: Contact us by email, phone call, fax, Instant Messenger (Trademanager, MSN, Skype) and let us know your enquiry.
• Discussion: Specify the items you desire, confirm specification; OEM/ODM consultation.
1.What kind of products will you produce ?
2. What is the capacity(per hour) you want ?
3. What kind of package , plastic bottle ,glass bottle : volume ,height ,neck diameter ,diameter of bottle or other please inform us of details .
4.Sole machine or whole production line .
• Quotation: Prices offered and accepted.
• Place order as per contract or discussion.
• Perform invoice( sales contract ) In duplicate confirmed and kept by both sides.
• Payment settled.
• Order completed under our arrangement.
• Goods shipped as per contracted term.
• Goods arrive at local port or warehouse, depending on contracted term.
• Support & re-ordering.