Black cap 1.6ml 1.28ml Sodium Citrate 3.8% ESR tube Blood Test Tube
This tube is used for ESR detection. Capped and labeled
transparent polypropylene tubes.
Filled with 3.8% sodium citrate (anticoagulant).
The citrate: blood ratio (according to the Westergren method) is
1:4, so the tubes contain 0.4 ml of stable 3.8% sodium citrate
solution.
The printed fill line indicates 2.0 ml so 1.6 ml of blood will be
added.
The cap design results in a comfortable and reliable handling,
specially because it is possible working with gloves without
slipping.
Volume fill line, expiry date and batch number are printed on the
label; so the product traceability is guaranteed.
Specification
- Color Code: Black
- Volume: 1-10ml
- Size: 13*75mm, 13*100mm, 8*120mm
- Material: Glass, PET(Plastic)
- Expiration: 2 years for glass tube, 1 year for PET tube
| Cat.No | Material | Size | Volume | Cap Color | Packing |
| JZ0E1375 | Glass/PET | 13*75mm | 2-4ml | Black | 100pcs/tray, 1200/1800pcs per carton 1million pcs a 20FT container 2million pcs a 40FT container 2.6milion pcs a 40HQ container |
| JZ0E13100 | Glass/PET | 13*100mm | 5-7m | Black |
| JZ0E1316 | Glass/PET | 16*100mm | 8-10ml | Black |
| JZ0E8120 | Glass | 8*120mm | 1.28ml/1.6ml | Black |
INSTRCUTION FOR USE
1. Check the tube;
2. Insert the blood collection needle into the vein after the skin
disinfection;
3. Put the puncture needle into rubber stopper and the blood will
automatically flow into the tube;
4. After the blood is collected to the calibration capacity, first
pull out the IV needle on body, then pull off the tube.
5. Gently reverse the tube 5-8times after collection(except no
additive tube).
NOTICE for use
1. The needle should vertically piercing in the middle of rubber
stopper;
2. Don't moving the rubber stopper;
3. Single use only. Discard after use;
4. It is prohibited to use the tube which are contaminated or have
impurities in it;
5. In order to prevent blood spatter or avoid blood infection the
operators should weargloves and other protective devices;
STORAGE
1. The vacuum blood collection tubes should be stored in cool dry
place at 0℃-25℃;
2. The vacuum blood collection tubes shall be vertical and
prohibited to invert.
