Results forblender accessibility probefrom 644 Products.
|
|
UL 982 Figure 30.2 Blender Accessibility Probe For Blender Container Abuse Test UL 982-Figure 30.2 Blender Accessibility Probe for Blender Container Abuse Test 30.4.4 Blender ...
|
|
|
|
|
Temperature-measuring and accessibility probe-UL923 Figure 37.1 37 Surface Temperature Tests 37.1 General 37.1 .1 An appliance employing a resistance-type element, such as a ...
|
|
|
|
|
UL 1017 figure 25 Accessibility probe for opennigs 1.375 in(34.9mm) or more
|
|
|
|
|
Telecom Test Probe Usage: Check access to telecommunications voltages. The Telecom Access Probe is required in IEC 60950, IEC 60065, UL and CSA Standards. It is used to check ...
|
|
|
|
|
Wedge Probe For Document Shredder The wedge probe is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could ...
|
|
|
|
|
UL Test Finger / UL Accessibility Probe Product information: The UL accessibility probe is also called UL articulated probe or jointed test finger probe. It conforms to many ...
|
|
|
|
|
Wedge Probe For Document Shredder The wedge probe is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could ...
|
|
|
|
|
CSA C22.2 No.47-13 Figure 1 Articulated Probe The UL Metal Articulated Probe is a standard articulated finger as required by Underwriters Laboratories in many of their standards. ...
|
|
|
|
|
UL Test Probes UL Test Probe Test Pin Jointed Test Finger Test Fingernail Test Tongue UL standards Articulated Test Probes for electrical safety accessibility test on Protection of ...
|
|
|
|
|
UL Test Probe Test Pin Jointed Test Finger Test Fingernail Test Tongue UL standards Articulated Test Probes for electrical safety accessibility test on Protection of persons and ...
|
|
|
|
|
IEC 60529 Test Sphere50mm , IP1X This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
|
IEC62368 Annex V.1.3 Test method 2 Unjointed test probe Openings tested with straight unjointed test probes Openings preventing access to a part by the applicable jointed test ...
|
|
|
|
|
UL Enamel Wire Probe 25 Usage: This probe is use to checking access to enamel coated wire accord to UL standard requirement. stainless steel with stainless stell handle.
|
|
|
|
|
UL Enamel Wire Probe 10 This probe is use to checking access to enamel coated wire accord to UL standard requirement. stainless steel with derlin handle.
|
|
|
|
|
EC61032 Figure 7 Device 11 Rigid Test Finger Probe Products information: This rigid finger probe conforms to the standard requirement of IEC61032 figure 7 device 11,IEC60884...
|
|
|
|
|
IEC 60529 Test rod 2.5mm, IP3X Usage This wire is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
|
IEC 60950 Figure 2C / IEC62368-1 Figure V.3 Blunt Probe Testing the Limited Access to Telecommunications Voltages The Blunt probe is required in IEC62368,IEC 60950,IEC 60065, UL ...
|
|
|
|
|
Diameter 60mm Test Rod , EN 60335-2-30 Surfaces that are accessible to the test rod Product Description: 1. According To Standard: EN 60335-2-30 2. It is used to the protective ...
|
|
|
|
|
Antenna coaxial sockets mounted on the apparatus Antenna coaxial sockets mounted on the apparatus and incorporating parts or components which isolate HAZARDOUS LIVE parts from ...
|
|
|
|
|
Jointed test probe for equipment likely to be accessible to children Reference Standard: IEC62368-1-Figure V.1 Specification: Test Finger Length:234mm The Bending Part Length: 30...
|
|
|
You may also be interested in :
