Results forblend polyol and isocyanate mdifrom 13 Products.
|
|
Blend Polyol & ISOCYNATE MDI for super absorbent flower mud TDS JYE-6101 Introduction: JYE-6101 is a kind of blend Polyol which is made from Rigid Polyether Polyol, water, blowing ...
|
|
|
|
|
Blend Polyol & ISOCYNATE MDI for water heater with 141B blowing agent Product Introduction JY-SH01 is kind of Blend Polyol which is applied for solar heater. It enjoys excellent ...
|
|
|
|
|
Blend Polyol and Isocynate for the knee protetive pad foam JYP-A / JYP-B is two component material which is used to make the knee protective pad foam and other soft pad. JYP-A is a ...
|
|
|
|
|
Polyol And Isocyanate For High Resilance Car Seat Foam CHARACTERISTICS Blend polyol JY1342-A is made up of polymer polyol, grafted polyether polyol, cross linker, blowing agent, ...
|
|
|
|
|
Low mould temperature MDI system car seat foam JYHR－11A/B Introduction: JYHR-11A is made up of polymer polyol, grafted polyether polyol, cross linker, blowing agent, and composite ...
|
|
|
|
|
Polyol and Isocynate for the knee protetive pad JYP－A/B Description: JYP-A is a blend Polyol which is combined by the polyether Polyol, Polymer polyol and some special slow rebound ...
|
|
|
|
|
TM system PU high resilience car seat foam JYHR－21A/B Introduction: JYHR-21A is made up of polymer polyol, grafted polyether polyol, cross linker, blowing agent, and composite ...
|
|
|
|
|
TM system PU high resilience car seat foam JYHR－21A/B Introduction: JYHR-21A is made up of polymer polyol, grafted polyether polyol, cross linker, blowing agent, and composite ...
|
|
|
|
|
MT system with low mould temperature for HR foam JYST－31A/B Introduction: JYST-31A is made up of polymer polyol, grafted polyether polyol, cross linker, blowing agent, and ...
|
|
|
|
|
Blend Polyol & ISOCYNATE MDI for spray foam with 141B blowing agent JYSP-102 Introduction: JYSP-102 is a blend Polyol which contains the blowing agent 141B, some base Polyol or ...
|
|
|
|
|
Low mould temperature MDI system seat foam JYHR－11A/B Introduction: JYHR-11A is made up of polymer polyol, grafted polyether polyol, cross linker, blowing agent, and composite ...
|
|
|
|
|
Polyether Polyol for Boxing Gloves System 1. APPLICATIONS It applied for boxing glove. 2. CHARACTERISTICS Part A is blend polyol which is combined by base polyol, cross-linking ...
|
|
|
|
|
PU high resilience foam materials for the boxing glove BRST－01A/B Introduction: BRST-01A is made up of polymer polyol, grafted polyether polyol, cross linker, blowing agent, and ...
|
|
|
You may also be interested in :
