6-6-1 Small Beer Bottling Filling Machine Small Beer Filling
Capping Machine
Working procedure
Can is pushed into can holding platform one by one by feeding screw
and star-wheel. After flushing by CO2, centering cup of filling
valve will fall to can; the distance between filling valves and
cans are sealed by springiness plastic ring. The movement of
centering cup is generated by plastic idler wheel along curvilinear
motion. After filled, valve will be closed, air is discharged, and
centering cup will rise from the can. Filled can will be sent to
conveyor chain, then to capper. Seamer will take the lid, turn over
the edge of can and turn the edge to finish the sealing action by
the control of cam. High pressure foam flushing device is equipped.
After that can is transferred to conveying system.
Main features
1) Wholly sealed widow structure which is beautiful, concise, easy and
highly operated;
2) Cycling tank design with precision polishing inside;
3) High precision and large flow rate filling valves to meet
productive requirement;
4) Specially designed roller structure which is easy to be adjusted,
locked and ensure sealing function;
5) Friendly and convenient operating panel with high expansibility.
6) The filling valve is adopts high precision mechanism valve, fast
speed filling, high precision liquid level.
7) The filling vat adopts SUS304 or 316L material designed sealing
vat, to achieve constant pressure filling.
8) The flow rate of the filling valve>125ml/s.
9) Main transmission adopts toothed belt and gearbox open-type
transmission assemblies, high efficiency, low noise.
10) The main drive adopts step-less speed change for frequency
conversion, the whole machine adopts PLC control; the capping
machine and filling machine adopt coupling joint, to ensure
synchronization of two machines.
11) With filling with can, no filling without can.
12) The filling manner is constant pressure filling, with fast filling
speed and stable action.
1.Compact structured, good-looking, easy to operate and highly
automated.
2.Parts with contact with material are all made of stainless steel
of food-grade, no dead angles and easy to clean up.
3.Filling volume is controlled with film valves to ensure accurate
filling.4.Liquid buffer element specially designed inside filling valves
can eliminate the cutting affection and wallop between liquid and
container, easy to eliminate the air bubble in material.
5.Equipped with overload system to safeguard machine and operators.
6.Equipped with cap absence detector and bottle jam-up detector,
which could stop the monoblock in that case.
7.Equipped with output calculating function for monoblock.
8.Main electronic components (touch screen, PLC and frequency
inverter) are imported products.
Blowing Filling Capping Combiblock
Drinking Water Filling Machine
3.Technical parameter
| Model: | GF-8 | GF-12 | GF-18 | GF-24 | GF-32 |
| capacity (330ml based) | 2000BPH | 2600BPH | 5000BPH | 8000BPH | 12000BPH |
| Suitable bottle : | Can, aluminum can, iron can and so on |
| Machine size:(mm) | 800*800*2200 | 980*900*2350 | 1000*1200*2400 | 1500*1500*2500 | 1800*2000*2600 |
| weight: (kg) | 1200 | 1500 | 1800 | 2500 | 3200 |
About Us:
Jiangsu Zhongyin Machinery Co., LTD. is located in Donglai Town,
Zhangjiagang City, Jiangsu Province. It has international
standard workshop more than 15000 square meters. It is one of the
professional beverage packaging machinery manufacturers
withcollecting research, development and manufacturing. It is
China's best beverage machinery equipment suppliers. As liquid
packaging industry enterprise, the drink service network is all
over the world more than 30 countries and regions, products are
widely used in drinks, flavor, cosmetic, beer, milk, and
pharmaceutical industries.
Since company has begun, focused on the professional technology ---
beverage packaging machinery, to forge leading beverage packaging
machinery, upstream and downstream related both beverage packaging
equipment research and development. Always adhere to technological
innovation to drive the company development. It has been applied
for patents, has formed a unique market with competitive advantage.
In order to make our equipment performance better and more stable
of operation, our company cooperates with domestic professional
institutes, colleges and universities to carry out the combination
of the filling machine and optimized the related equipment design,
especially with Shanghai jiaotong university school of mechanical
engineering. Using Shanghai jiaotong university, wuxi institute of
food engineering technology and other universities’ strong
technology research and development strength, to analyze the
foreign advanced technology, digestion on the basis of absorbing
foreign advanced technology, to change our original design
perfectly, and achieved good results.
FAQ:
Q1: Are you manufacturer? A1: Yes, we have the international
standard workshop more than 150,000 square meters; besides, we are
very professional manufacturer in beverage filling and packing
machine field more than 10 years.Q2: Do you have reference project? A2: We have reference project in
most countries, if we get the permission of our customer who has
brought the machines from us, we can send you their contact
imformation, you can go to vist their factory. Besides, you are
always welcome to come to visit our factory, and see the machines
running at our factory. Besides, when you come, we can pick you up
from the station near our city.
Q3: Do you have agent and after-service stations? A3: We are
looking for more overseas agents, welcome to join us!
Q4: Do you provide customized service? A4: We can design the
machines according your requirements(material , power , filling
type , the kinds of the bottles , and so on) , at the same time we
will provide you our professional suggestion, as you know, we have
been in this industry more than 10 years.
Q5: What's your guarantee or the warranty of the quality if we buy
your machines? A5: We offer you high quality machines with 1 year
guarantee and supply life-long technical support.
Q6: How long time for installation?
A6: This depends on your machines order, normally, our company will
dispatch one or two engineers to customers factory, it will take
about 10 days to 25 days.
Q7: What information you need before sending the price quotation?
A7: 1. What kind beverage you want to produce? Drinking water? Soft
drink? Hot drink? Aseptic drink? Beer? Milk? etc.? 2. Bottle and
cap material? Plastic bottle and plastic screw cap? Glass bottle
with metal crown cap? Can? 3. Bottle volume? 250ml, 330ml, 500ml,
750ml, 1L, 2L, etc.? 4. Producing capacity you need? How many
bottles per hour?
