Jiangsu Zhongyin Machinery Co.,Ltd |
|
Industrial Reverse Osmosis System Water Treatment Plant
Basic information:
The systems can be supplied with several options that will help reduce energy, reduce the amount of water required for operation and provide for water recycling.
Some of these options are as follows:
1. Low energy membranes. High water recovery operation (depending on feed quality)
3. Output controlled operation with variable speed drive
4. Reject water recovery and reuse systems
First stage(Sand filter) pretreatment.
The use of multi-medium quartz sand filters, main purpose is to
remove the water contains sediment, manganese, rust, colloid
material, mechanical impurities, suspended solids and other
particles in the above 20UM of substances hazardous to health.
Second stage (Carbon filter)pretreatment
Activated carbon filters used to remove the pigment in the water,
smell, a large number of chemical and biological organisms,
reducing the residual value of water and pesticide pollution and
other harmful pollutants.
Third stage(Resin softener) pretreatment
Cationic resin used for water softening, primarily to remove
hardness of water. So as to effectively prevent the reverse osmosis
membrane fouling. System can automatically recoil, and so is red.
Fourth stage(Micron filter) pretreatment
Particle size in water to remove fine particles, sand filters can
remove very small colloidal particles in the water, so that the
turbidity reached 1 degree.
RO system
The core equipment of water pump is imported and the membrane film
is imported from Hydranautics in America. It is equipped with full
set of clean unit. It has the features of simple structure,
convenient operation and high technological level.
Sodium ion exchanger
It can remove calcium and magnesium ions in the water, so as to
soften the water.
UV sterilize
It uses the UV to kill some bacteria that may also pass through the
reverse osmosis system.
Ozone sterilizer
Some bacteria may not be killed by UV, the sterilizer uses ozone to
kill those bacteria.