|
[China]
Trade Verify
Address: No.126 Jincheng Rd., Xindeng Industral Area,Fuyang Dist. ,Hangzhou,Zhejiang Prov.China
Contact name:Yomi
Hangzhou Cuberyllium Metal Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
Chemistry of C17510 Material:
| Be | 0.2-0.6 |
| Ni | 1.4-2.2 |
| Cu | Balance |
Avalibale Standard of C17510 Material:
C17510 is a higher conductivity, lower hardness beryllium copper alloy.
| UNS Designation/ASTM | EN | DIN | RWMA |
| C17510 | CW110C | 2.085 | Class III |
Available Form for C17510 Material:
| C17510 plate/sheet |
| C17510 disc |
| C17510 round rod/bar |
| C17510 square bar |
| C17510 rings |
Performance Attributes of C17510 Material:
Material C17510 is a supersaturated solid solution copper-based alloy, which is a non-ferrous alloy with good combination of mechanical properties, physical properties, chemical properties and corrosion resistance.
After solid solution and aging treatment, C17510 has high strength limit, elastic limit, yield limit and fatigue limit equivalent to special steel; at the same time, it has high electrical conductivity , thermal conductivity, high hardness and resistance, high creep resistance and corrosion resistance.
Typical Properties of C17510 Material:
| Material | Thermal Conductivity(w/m°C) | Coefficient of Thermal Expansion(/°C) | Modulus of Elasticity(KN/mm²) | Rockwell Hardness(HRB) | Tensile Strength(N/mm²) | Elongation(%) |
| C17510 | 245 | 17.6x10 | 132 | 95-102 | 800 | 20 |
Performance of C17510 Material:
Product Photo of C17510 material:
Application of C17510 Material:
Other Material Grades provided by Cuberyllium:
C17200 beryllium copper alloy
--Available form: rod, bar, strip, sheet, plate, tube, wire
C17300 beryllium copper alloy
--Available form: rod
C17500 beryllium copper alloy
--Available form: rod, plate
Qbe2.0 beryllium copper alloy
--Available form: rod, bar, strip, sheet, plate, tube, wire
Qbe1.9 beryllium copper alloy
----Available form:strip
FAQ:
Q1:What’s the advantages the Beryllium Copper of CUBERYLLIUM®?
A1: 1: The Biggest Coil weight could be reach 1200kg/Coil
2:We are the only one who melting by Vacuum semi-Continuous Furnace.
3:Surface further polishing for top clients.
Q2: How about your payment terms?
A2: Generally, 30% as deposit by T/T, then 70% should be paid
before the delivery.
Q3: Why you melting by Vacuum semi-Continuous Furnace?
A3:Could be get the Cast ingot without gas,smaller segregation,
Grain Refinement
Q4: What's the payment terms?
A4: We accept T/T, L/C, Paypal etc. It can be negotiated when the
amount is different.
