Active Member
|
[China]
Address: Jiaonan Development Zone Industrial Park Qingdao City,Shandong P.R.China 266400
Contact name:Lily Fu
Qingdao Running Machine Co.,Ltd |
|
|
Durable Conveyor Belt Vulcanizing Machine Belt Hot Joint Rubber Machine
Characteristic features:
• German TÜV certified vulcanizing presses
• Rotable carrying handle for crossbeams and heating plates
• Equal surface pressure over the complete splicing due to pressure bag, certified by German TÜV
• Pressure bag with aramid inlays meets highest safety standards
• 20% less deflection of crossbeams
• 20% less liquid requirement, therefore faster build- up of pressure than comparable presses of market competitors
• Tension bolt threads protected against damage
• Tension bolts made of high-strength steel, however, 2 kg less apiece than conventional steel tension bolts
• Tension bolts sealed up and protected against pollution
• Lightweight, high-strength aluminum pressure distribution sheet
• Pressure water system: FLUID: For pressure up to 140 N/cm² (200 PSI) AIR: For pressure up to 70 N/cm² (100 PSI)
• Heating plate connection, protection class IP 64 > certified by GermanTÜV
• Optimized monitoring of temperature difference
• Available for voltages from 230 to 500 Volt
• Control cabinet, minimum protection class IP 44
• Optional data recording within control cabinet, data export via USB interface
• Usable in ambient temperature from -20°C to +55°C
• Distinct colours for pressure and cooling water hoses (red/black or blue/white)
• Silicone heating mat with vulcanized-on intermediate plate
• Transport-proof, plugable connection cable
Application of rubber belt vulcanizer :
1. Steel Cord Belt Intermediate Rubber is an uncured rubber for hot vulcanized belt splicing.
2. It is designed to use as an inter-core cord rubber replacement material in splicing steel cord conveyor belts or a tie gum in fabric belts.
3. The material is designed to bond to cured intercore rubber and
wire cords in all standard grade steel cord conveyor belts, as well
as fabric belt cured skim rubber and general bond improvement
material for general grade fabric conveyor belts.
Technical Parameters:
| Model | Belt Width (mm) | Power(kw) | Dimensions (L*W*H mm) | Weight(kg) | Single Piece Weight(kg) |
| ZLJ-650*830 | 650 | 9.5 | 1370*830*630 | 430 | 45 |
| ZLJ-650*1000 | 10.8 | 1370*1000*630 | 500 | 66 | |
| ZLJ-800*830 | 800 | 11.2 | 1520*830*630 | 535 | 70 |
| ZLJ-800*1000 | 13.5 | 1520*1000*630 | 575 | 79 | |
| ZLJ-1000*830 | 1000 | 14.1 | 1720*830*630 | 595 | 82 |
| ZLJ-1000*1000 | 15.7 | 1720*1000*630 | 620 | 95 | |
| ZLJ-1200*830 | 1200 | 16.5 | 1920*830*710 | 800 | 96 |
| ZLJ-1200*1000 | 17.2 | 1920*1000*710 | 870 | 113 | |
| ZLJ-1400*830 | 1400 | 18.6 | 1930*830*760 | 930 | 107 |
| ZLJ-1400*1000 | 20.7 | 2120*1000*760 | 1180 | 132 | |
| ZLJ-1600*830 | 1600 | 21.5 | 2320*830*800 | 1270 | 120 |
| ZLJ-1600*1000 | 22.3 | 2320*1000*800 | 1460 | 146 | |
| ZLJ-1800*830 | 1800 | 23.3 | 2520*830*850 | 1380 | 137 |
| ZLJ-1800*1000 | 25.6 | 2520*1000*850 | 1650 | 164 | |
| ZLJ-2000*830 | 2000 | 27.2 | 2720*830*950 | 1760 | 154 |
| ZLJ-2000*1000 | 30 | 2720*1000*950 | 1860 | 182 | |
| ZLJ-2200*830 | 2200 | 29.2 | 2920*830*950 | 1860 | 165 |
| ZLJ-2200*1000 | 34.1 | 2920*1000*950 | 1970 | 198 |
* Vulcanizing temperature: 145ºC (adjustable 0~200ºC)
* Temperature-rising time (from normal temp to vulcanizing
temp):≤50 mins(around 25~30 mins normally)
* Improved cooling system: using pressure pump for cooling:only 5mins (cooling from 145 to 75 degrees)
* Belt width: from 650mm to 3000mm 200PSI Almex alike Uniform Pressure Bag for Conveyor Belt Press
* Degree of the heating platen:22 °/17 °/ 20 ° (rectangle and
other degree is optional)
* Waterbag/ air pressure Press for 100PSI, 200PSI etc.
* Surface pressure for textile and steel cord belts, Up to
1.8Mpa.
* 100 p.s.i. (7 kg/cm sq.) units suitable for splicing fabric
ply belting
* 200 p.s.i. (14 kg/cm sq.) units suitable for splicing steel
cord conveyor belting
* Customization/OEM:Different heating platen size and
combination
Portable Water-Cooled Rubber Belt Vulcanizing Machine and heating plates with silicone heating mats have newly been developed and distributed by RUNNING AMCHINE CO., Characterized by highest quality features and application-oriented design, they are suitable for splicing of fabric- and steel cord conveyer belts.
Package of rubber belt vulcanizer :
