Active Member
|
[China]
Address: No.388 Heping Road, Xinxiang City, Henan Province,China
Contact name:Emily
Xinxiang jinrui machinery factory |
|
|
Introduction
The corrugated sidewall belt conveyor is composed of corrugated sidewall belt, driving device, transmission pulley, return pulley, redirecting wheel, idler roller, cleaner, tensioning device, frame etc.
Corrugated sidewall belt
The corrugated sidewall conveyor belt plays the role of traction
and bearing in the sidewall machine. It is composed of a base belt,
a corrugated rib and a transverse partition. The corrugated rib is
glued on both sides of the base tape, and the transverse partition
is glued between the ribs on both sides according to a certain
interval;
Drive device
The driving device is the power part of the sidewall machine, which
can be driven by electric drum and motor reducer.
Transmission pulley
The function of the drive roller is to transmit the power of the
driving device to the conveyor belt through friction and make it
run. The driving drum is located at the head of the sidewall
machine. When the electric drum is used as the driving device, the
electric drum plays the role of the driving drum.
Return pulley
The function of the return pulley is to change the running
direction of the conveyor belt. The return pulley of the sidewall
machine is located at the tail or the lower branch of the concave
arc frame. The tail reversing roller is also used as a tension
roller.
Idler roller
The idler is used to support the conveyor belt and the materials on
the conveyor belt and make it run stably.
Clearner
The clearner is used to clean the materials adhering to the
conveyor belt. There are head clearner and tail clearner.
Tensioning device
The function of the tensioning device is to tension the conveyor
belt so that it has the working tension required to ensure normal
operation.
frame
The function of the frame is to support the rollers, redirect
wheels, and guide troughs to make the conveyor belt and conveying
materials run stably.
The frame has a convex arc section frame, a concave arc section
frame, a middle frame and outriggers.
| Belt Width(mm) | 500 | 650 | 800 | |||||||
| Side wall Height(mm) | 80 | 120 | 120 | 160 | 120 | 160 | 200 | 240 | ||
| Part angle throughput | 30° | 46 | 71 | 104 | 120 | 128 | 157 | 195 | 235 | |
| (m³/h) | 45° | 35 | 57 | 83 | 97 | 102 | 127 | 157 | 195 | |
| 60° | 25 | 40 | 58 | 69 | 72 | 90 | 112 | 142 | ||
| 90° | 13 | 21 | 31 | 37 | 38 | 48 | 60 | 76 | ||
| Dimensions | height of first rollerH2/h(mm) | 1100-2000 | 1300-2000 | 1300-2000 | ||||||
| height of tail roller | 600 | 600 | 600-800 | |||||||
| H2/h(mm) | ||||||||||
| height of belt surface H2/h(mm) | 760-800 | 800-850 | 800-1115 | |||||||
| width of ancho | 870 | 1020 | 1220 | |||||||
| B2/h(mm) | ||||||||||
| Belt Width(mm) | 1200 | 1400 | ||||||||
| Side wall Height(mm) | 160 | 200 | 240 | 300 | 160 | 200 | 240 | 300 | 400 | |
| Part angle throughput | 30° | 275 | 331 | 419 | 466 | 319 | 395 | 500 | 564 | 794 |
| (m³/h) | 45° | 222 | 267 | 347 | 384 | 258 | 318 | 414 | 465 | 680 |
| 60° | 158 | 190 | 253 | 178 | 184 | 226 | 302 | 337 | 524 | |
| 90° | 85 | 102 | 136 | 149 | 98 | 121 | 162 | 180 | 281 | |
| Dimensions | height of first rollerH2/h(mm) | 1400-2000 | 1600-2000 | |||||||
| height of belt surface H2/h(mm) | 800-1000 | 800-1200 | ||||||||
| height of belt surface H2/h(mm) | 1050-1500 | 1050-1700 | ||||||||
| width of ancho | 1690 | 1890 | ||||||||
| B2/h(mm) | ||||||||||
Selection Conditions
1. What is the conveying material?
2. What is the handling capacity of conveying material per hour?
3. What is the size and weight of conveying material?
4. Can you confirm the conveying speed?
5. What is your voltage (V,HZ and PH)?
6. What is the width and length of the belt?
7. Is there any inclined angle of the conveyor?
