Home Companies Xinxiang jinrui machinery factory

Conveyor Spare Parts Slotted Roller Grooved Rollers Idler

Active Member

Contact Us

[China]

Address: No.388 Heping Road, Xinxiang City, Henan Province,China

Contact name:Emily

Xinxiang jinrui machinery factory

Conveyor Spare Parts Slotted Roller Grooved Rollers Idler

Country/Region	china
City & Province	xinxiang henan

Product Details

Bulk Material Handling Inclined Movable Belt Conveyor Carbon Steel

1. Product Categories

Trough rollers can be divided into: ordinary type, forward tilt type, quick-change bearing type, hanging type, variable groove angle type, transition type, V type, etc.

Parallel rollers can be divided into: ordinary type, comb type, forward inclined type, steel rubber type, spiral type, etc.

The self-aligning roller can be divided into: general type, friction reversible type, strong type, cone type, spiral type, combined type, etc.

Buffer rollers can be divided into: spring version, buffer ring type, strong buffer type, adjustable elastic type, hanging type and so on.

2. Main function and scope of application

Grooved rollers are widely used in open-air dusty and corrosive environment, such as mines, power plants, steel plants, stone plants, cement plants, coal washing plants, salt plants, alkali plants, chemical fertilizer plants, docks and other transportation places often use grooved rollers.

3. More attention:

3.1. During the installation, pay attention to the assembly dimensions of all parts of the fuselage and keep the straightness of the whole machine.

3.2. Tighten bolts when installing bolt fasteners.

3.3. The center line of the belt at both ends shall be aligned when making the belt joint to prevent the belt from running off.

3.4 When installing the protection part of the electric appliance, be careful to prevent damage.

4. Packing Details:

4.1, Outer packing is plywood case, which is up to the international standards.

4.2, Inner packing is Moisture-proof and water-proof membrane.

4.3, All of package are wrapped by 0.5mm steel belt to further strengthen.

5. Maintenance and repair

5.1 under normal conditions, the conveyor is required to start without load and avoid short-time starting.

5.2 it is necessary to check whether there is oil leakage in the reducer regularly, and whether the regular oil filling volume is in conformity with the construction in time

Correct and supplement.

5.3 if there is squeal at the driving drum, it means that the belt is slipping. Check whether the belt is tensioned.

5.4 the belt joint shall be inspected frequently, and the damaged parts shall be cut and redone in time, and the damaged parts shall be protected during redoing

6. Tech data

Belt width(mm)	Roller		Bearing NO.
800	D	L	Bearing NO.
1000	89	315	204,205
1200	108	380	204,205,305
1400	133	465	205,305,206,306
1600	133	530	205,305,206,306
1800	159	600	205,306,307,308,309
2000	159	670	207,309,308
2200	194	800	207,307,308,309
2400	194	900	206,307,308,309