Bulk Material Handling Industrial Inclined U Type Shafted Screw
Conveyor
The screw conveyor is widely used for conveying powder, granule or
small block materials, usually it could be used with the suit sieving machine.
Characteristics
1. The structure is relatively simple and the cost is low;
2. Reliable work, simple maintenance and management;
3. The size is compact, the section size is small, the occupation
area is small;
4. It can realize sealed transportation, which is beneficial to the
transportation of materials that are easy to fly, hot and smelly,
and can reduce the pollution to the environment.
5. Easy to load and uninstall. The horizontal screw conveyor can be
loaded and unloaded at any point on its transmission line;
6. The unit energy consumption is large;
7. The material is easy to grind and wear in the process of
transportation, and the wear of spiral blade and material groove is
also more serious
Application
U Trough screw conveyor is widely used in building materials,
metallurgy, chemical industry, machinery, light industry, grain and
food industry. U-type screw conveyor is suitable for conveying
powder Shaped, granular, small bulk materials, such as cement, fly
ash, grain, chemical fertilizer, mineral powder, sand, soda and so
on. U-shaped screw conveyor is not suitable for transporting
materials that are easy to deteriorate, sticky and easy to caking.
The working environment temperature of the conveyor is usually-20
°40 °, the temperature of the conveying material is generally 20
°80 °℃, the U-shaped screw conveyor is suitable for horizontal and
small inclination arrangement, and the inclination angle is not
more than 15 degrees. If the tilt angle is too large, the tubular
screw conveyor should be selected.
Technical parameter of Screw Conveyor
Model | Diameter mm | Pitch mm | Speed r/min | Standard Capacity(m3/h) | Speed r/min | Standard Capacity(m3/h) | Speed r/min | Standard Capacity(m3/h) |
φ0.45 | φ0.33 | φ0.15 | φ0.45 | φ0.33 | φ0.15 | φ0.45 | φ0.33 | φ0.15 |
LS200 | 200 | 200 | 100 | 16.9 | 12.4 | 5.6 | 80 | 13.5 | 9.9 | 4.5 | 63 | 10.7 | 7.8 | 3.6 |
LS315 | 315 | 315 | 80 | 52.9 | 38.8 | 17.6 | 63 | 41.6 | 30.5 | 13.9 | 50 | 33.1 | 24.2 | 11 |
LS400 | 400 | 355 | 71 | 85.3 | 62.5 | 28.4 | 56 | 67.3 | 49.3 | 22.4 | 45 | 54.1 | 39.6 | 18 |
LS500 | 500 | 400 | 63 | 133.2 | 97.7 | 44.4 | 50 | 105.8 | 77.6 | 35.3 | 40 | 84.6 | 62.0 | 28.2 |
LS630 | 630 | 450 | 50 | 188.9 | 138.5 | 63.0 | 40 | 151.1 | 110.8 | 50.4 | 32 | 120.9 | 88.6 | 40.3 |
Our serivice
Pre-Sales Service Customer consultant 24 hour online Engineer team provide design drawing Skilled staff responsible for production Take pictures for all Production process | After-Sales Service Provide installation instruction Solve any problems involved Tell the machinery maintain guidance Regular monthly sales tracking |
Selection Conditions
Material to be processed: _____ | Working environment is indoor or outdoor:________ |
Handling capacity: ________per hour | Working environment temperature: _______ ℃ |
Bulk Density: _____t/m3 | Installation form is horizontal or inclined : ________ |
Conveying distance: ________ | If it is inclined,what is the inclined degree_____° |
Material size:____mm | Water content:____% |
Material temperature: _______ ℃ | Working power supply: _____V ______HZ ______PH |