OM2 8F MPO MTP Cable Male To LC Breakout 2.0mm Cable Fiber Optic
Patch Cord
Product Description of MPO MTP Cable:
OM2 8F MTP Fiber Patch cable/trunk cable is terminated with MTP
connector on both ends. MTP Patch cable/trunk cables connect MTP
modules together as a permanent link. The Patch cable/trunk cables
are available with 12, 24,48,60,72 ,96,144fibers. Support speeds up
to 10/40/100Gbps data center solutions. They are typically adopted
to interconnect cassettes, panels or ruggedized MTP fan-outs, and
to facilitate rapid deployment of high-density backbone cabling in
data centers and other high fiber environments. Besides, MTP also
provides much flexibility and convenience once you have to change
the connector style in the patch panels. Instead of changing the
connector on the cable trunk,just installing a new cassette with
the new connector style on the cross-connect side of the patch
panel.
Features of MPO MTP Cable:
- 100% 3D tested/End surface tested/Loss tested/Polarization before
delivery
- MTP is optional.
- 4 fiber, 6 fiber, 8 fiber 12 fiber or 24 fiber is available
- 10G fiber or LSZH cable is available
- Excellent changeability and repeatability
- Tensile strength: 10NPC/UPC/APC polishing
- Fanout Length: 0.5M or 1M
- Compliance with Telcordia GR-1435-Core Compliant
- US Conec MTP/Senko MTP/OPTICO MPO connectors are available
- High quality ferrule and accurate alignment by PIN and PIN hole
- Low insertion loss and high return loss
- High interchangeability and durability
- MPO fiber optic patch cord comes in many types and design blueprint
can be provided quickly.
- Compliant with Telcordia GR-326-CORE, IEC and RoHS standards
Differences between conventional OM1/ OM2/ OM3/ OM4 optical cables:
- OM1 is a conventional 62.5/125 optical fiber.
- OM2 is a conventional 50/125um, OM3 (50/125, 10 Gigabit multimode
fiber, including OM3/150, OM3/300), OM4 (an upgraded version of
OM3, which is classified as OM4/550 by the industry), and OM5
(50/125, 10 Gigabit multimode fiber).
- The OM2 optical fiber uses LED (Light Emitting Diode) as the basic
light source in both standard and design, while OM3 and OM4 are
optimized on the basis of OM2, making them suitable for
transmission with LD (Laser Diode Laser Diode) as the light source
at the same time. Compared with OM2, OM3 has higher transmission
rate and bandwidth, so it is called optimized multimode fiber or
10GbE multimode fiber, while OM4 is further optimized on the basis
of OM3, Better performance.
Application of MPO MTP Cable:
- 10G to 40G , 25G to 100G migration
- Optical fiber communication system, CATV and telecommunication
network
- Wiring in communication base station and distribution case
- Production and testing of optical devices
- Telecomunication Infrastructures
- LANs and WANs
- FTTx
- Connection of indoor to outdoor optical cable wiring equipment
- For internal connection applications of optical transceivers,
40G/100G QSFP, QSFP+ and other optical transceivers.
- Data Centre Infrastructures
- Wiring of local area network between different enterprise buildings
- Connection of optical links in optical active devices
- Optical fiber to the building (FTTB) application.
Technical Specificaitons of MPO MTP Cable:
A.
| Model | SM | MM |
| Connector A and B : MPO/MTP |
| Connector Fiber Count | 8,12,24,32,48 Core |
| Polish | PC,APC | PC |
| Insertion Loss | Standard | ≤0.70dB | ≤0.50dB |
| Elite Low Loss | ≤0.35dB | ≤0.30dB |
| Return Loss | PC≥50dB,APC≥60dB | ≥30dB |
| Connector B:LC,LC Uniboot,SC,FC,ST |
| Polish | PC,APC | PC |
| Insertion Loss | ≤0.2dB | ≤0.2dB |
| Return Loss | PC≥50dB,APC≥60dB | ≥35dB |
| Durability(500 Matings) | ≤0.2dB |
| Test Wavelength | 1310/1550nm | 850/1300nm |
B.
| Type A | MPO MTP(Female) | Type B | MPO MTP(Female) |
| Fiber Type | OM4 50/125μm | Wave Length | 850/1300nm |
| 400G Transmission Distance | 100m@850nm | Fiber Type | Corning ClearCurve |
| Polish Type | APC-APC | minimum bend radius | 7.5mm |
| Insertion Loss | ≤0.35dB(Typical Value 0.15dB) | Return LossL | ≥20dB |
| Attenuation @850nm | ≤2.3dB/km | Attenuation@1300nm | ≤0.6dB/km |
| Diameter of outer sheath | 3.0 mm | Outer sheath material | Plenum (OFNP) |
| Installation tensile load | 100N | Long term tensile load | 50N |
| Operating Temperature | -10°C ~ +70°C | Operating Temperature | -40°C~ +85°C |
Production Process of MPO MTP Cable:
Other Types of MPO MTP Cable:
FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
15-20 days if the goods are not in stock, it is according to
quantit
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance ,balance before shippment.
Q: Do you accept OEM or ODM?
A: Yes,we're factory. any your customized requirements we can do
our best to help you realize.
