Female Multi Mode MPO MTP Cable Polarity B OM4 MTP Cable With Magenta

Active Member

Contact Us

[China]

Address: 3rd floor, Jinluan international business center, Longhua Street, Longhua District, Shenzhen, China.

Contact name:Candy Tang

Shenzhen Begate Technology Co.,Ltd.

Female Multi Mode MPO MTP Cable Polarity B OM4 MTP Cable With Magenta

Country/Region	china
City & Province	shenzhen

Product Details

12 Core MPO MTP Cable Female Multi Mode OM4 Polarity B Trunk Cable With Magenta

Product Introduction of MPO MTP Cable:

1-24 cores Special tube filling compound ensure a critical protection of fiber; special sesigned compact structure is good at preventing loose tubes from shrinkong;FRP used as the central strength member;Water-blocking tape enhancing moisture-proof.

MTP fiber patch connectors make use of precision molded MT ferrules with metal guide pins and precise housing dimensions to ensure fiber alignment when mating. MTP fiber cable can be mass terminated in combinations of 4, 8, 12, 24 and 48 fiber ribbon cables and are typically used in high-density backplane and Printed Circuit Board (PCB) applications within data and telecommunications systems.

Features of MPO MTP Cable:

Backbone installation
Compliance with Telcordia GR-1435-Core Compliant
US Conec MTP/Senko MTP/OPTICO MPO connectors are available
High quality ferrule and accurate alignment by PIN and PIN hole
Low insertion loss and high return loss
High interchangeability and durability
MPO fiber optic patch cord comes in many types and design blueprint can be provided quickly.
Compliant with Telcordia GR-326-CORE, IEC and RoHS standards
MTP is optional.
100% 3D tested/End surface tested/Loss tested/Polarization before delivery
Small size, the volume is smaller than the SC connector;
Easy management, high reliability, few fault points, fast wiring;
High density, precise geometric design, can support 12 to 72 core or even 96 core fiber connections.

Application of MPO MTP Cable:

Data Centre Infrastructures
Wiring of local area network between different enterprise buildings
Connection of optical links in optical active devices
Wiring in communication base station and distribution case
Production and testing of optical devices
Telecomunication Infrastructures
LANs and WANs
FTTx
Optical fiber communication system, CATV and telecommunication network

Technical Specificaitons of MPO MTP Cable:

Type A	MPO MTP(Female)	Type B	MPO MTP(Female)
Fiber Type	OM4 50/125μm	Wave Length	850/1300nm
400G Transmission Distance	100m@850nm	Fiber Type	Corning ClearCurve
Polish Type	APC-APC	minimum bend radius	7.5mm
Insertion Loss	≤0.35dB(Typical Value 0.15dB)	Return LossL	≥20dB
Attenuation @850nm	≤2.3dB/km	Attenuation@1300nm	≤0.6dB/km
Diameter of outer sheath	3.0 mm	Outer sheath material	Plenum (OFNP)
Installation tensile load	100N	Long term tensile load	50N
Operating Temperature	-10°C ~ +70°C	Operating Temperature	-40°C~ +85°C

Parameter	MPO Connector
	SM	MM
	APC	PC
Insertion loss	0.35dB Max (0.15dB Typ.)	0.35dB Max (0.15dB Typ.)
Return loss	≥60dB	/
operating wavelength	1310nm, 1550nm	850nm, 1300nm
Ferrule Concentricity	≤1um	≤4um

Advantages of MPO MTP Cable:

Small size, the volume is smaller than the SC connector;
Easy management, high reliability, few fault points, fast wiring;
High density, precise geometric design, can support 12 to 72 core or even 96 core fiber connections.

Production Process of MPO MTP Cable: