12Core 5M MPO MTP Cable Female 10MB Multi Mode OM4 Polarity A Low
Insertion Loss
Product Description of MPO MTP OM4 Cable:
There are many types of MPO fiber connectors. In addition to the
number of cores, there are single-mode, multi-mode, standard loss,
and low-loss cores. And for 40G module or 100G module cores, are
multi-mode cores, 40G for 8-core multi-mode cores, 100G for 20-core
multi-mode cores, that is, a core is 10G, 8 core is 40G. Why not 80
gigabytes? Because 8 core inside, the signal is received have sent,
receive signal 4 core, transmit signal 4 core, a core 10G, it is
40G, 100G of the same reason. If the 40G MPO fiber jumper is in the
form of MPO-MPO, the 12-core MPO multi-mode core is generally used
for production. If the 100G MPO fiber jumper is in the form of
MPO-MPO, the 24-core MPO core is generally used for production.
Unused channels are left blank
Features of MPO MTP OM4 Cable:
- Compliance with Telcordia GR-1435-Core Compliant
- US Conec MTP/Senko MTP/OPTICO MPO connectors are available
- High quality ferrule and accurate alignment by PIN and PIN hole
- Low insertion loss and high return loss
- High interchangeability and durability
- MPO fiber optic patch cord comes in many types and design blueprint
can be provided quickly.
- Compliant with Telcordia GR-326-CORE, IEC and RoHS standards
- 100% 3D tested/End surface tested/Loss tested/Polarization before
delivery
- MTP is optional.
Advantages of MPO MTP OM4 Cable:
- Easy management, high reliability, few fault points, fast wiring;
- Small size, the volume is smaller than the SC connector;
- High density, precise geometric design
- Support 12 to 72 core or even 96 core fiber connections.
Application of MPO MTP OM4 Cable:
- Connection of indoor to outdoor optical cable wiring equipment
- For internal connection applications of optical transceivers,
40G/100G QSFP, QSFP+ and other optical transceivers.
- Data Centre Infrastructures
- Wiring of local area network between different enterprise buildings
- Connection of optical links in optical active devices
- Optical fiber to the building (FTTB) application;
- Wiring in communication base station and distribution case
- Production and testing of optical devices
- Telecomunication Infrastructures
- LANs and WANs
- FTTx
- Optical fiber communication system, CATV and telecommunication
network
Technical Specificaitons of MPO MTP OM4 Cable:
A.
| Cable Type | 12 Fiber | 24 Fiber | 48 Fiber | 72 Fiber | 144 Fiber |
| 1 Group | 2 Groups | 4 Groups | 6 Groups | 12 Groups |
| 12 Fibers per Group |
| Connector A | 12 MPO Connector (Male or Female) |
| Connector A Count | 1 | 2 | 4 | 6 | 12 |
| MPO/UPC or MPO/APC Connector |
| Connector A Breakout Length | Various Lengths |
| Connector B | 12 Fiber MPO Connector (Male or Female) |
| Connector B Count | 1 | 2 | 4 | 6 | 12 |
| MPO/UPC or MPO/APC Connector |
| Connector B Breakout Length | Various Lengths |
| Cable Jacket Type | Plenum (OFNP) |
| Total Cable Length | Various Lengths |
| Pin Out Configuration | Method A, B or C |
| Fiber Mode | Single Mode | | Multimode |
| 9-125um | OM1-62.5/125um |
| | OM2/OM3/OM4-50/125um |
| Insertion Loss | 0.35dB Max (0.15dB Typ.) | 0.35dB Max (0.15dB Typ.) |
| Return Loss | ≥60dB | ≥20dB |
| Cable Jacket Color | Yellow | Orange/Aqua/Magenta |
B.
| Type A | MPO MTP(Female) | Type B | MPO MTP(Female) |
| Fiber Type | OM4 50/125μm | Wave Length | 850/1300nm |
| 400G Transmission Distance | 100m@850nm | Fiber Type | Corning ClearCurve |
| Polish Type | APC-APC | minimum bend radius | 7.5mm |
| Insertion Loss | ≤0.35dB(Typical Value 0.15dB) | Return LossL | ≥20dB |
| Attenuation @850nm | ≤2.3dB/km | Attenuation@1300nm | ≤0.6dB/km |
| Diameter of outer sheath | 3.0 mm | Outer sheath material | Plenum (OFNP) |
| Installation tensile load | 100N | Long term tensile load | 50N |
| Operating Temperature | -10°C ~ +70°C | Operating Temperature | -40°C~ +85°C |
Packaging:
FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
15-20 days if the goods are not in stock, it is according to
quantit
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance ,balance before shippment.
Q: Do you accept OEM or ODM?
A: Yes,we're factory. any your customized requirements we can do
our best to help you realize.
