Friendship Machinery Co., Ltd |
|
2.4KW Small Pipe Welding Rotator / Press Type Pipe Welding Rollers
1. Technical data
Model | PP2 |
Maximum loading capacity | 2000Kg |
Applied work-piece diameter | Φ70-Φ820mm |
Rotation speed | 100-1000mm/min |
Rotate torque | 1000Nm |
Tilt torque | 5000Nm |
Tilt degree | ±45° |
Tilt center height | 910mm |
Speed adjustment | AC Inverter |
Pendant cable length | 5m |
Power | 2.4KW |
Weight | 1600Kg |
Dimension (L*W*H) | 2030*920*2630mm |
Pinch roller | Diameter: 120mm |
Width: 200mm | |
Cross slide | Motor: 25W |
Stroke: 150mm | |
Oscillator | Oscillator angle: 8 degree |
Center moving: 8 degress | |
Waving dewall time: 0-2s |
2. Summarize
That automatic welding
machine including: manipulator, welding rotator, and electric
system etc, mainly used to weld the butt welding seam which formed
from the pipe, pipe elbow, pipe flange, perpendicular tee pipe. The
welding head will be relatively fixed, while the piping spool piece
revolving at a specific rate, and the high efficient and low cost
shielded welding or SAW process is adopted, so it has the features
of easy-operation, reliable-performance and wide-application
field,and which enhancing productivity, increasing the extent of
automatic, reducing welder’s working intensity and adapting to
piping workshop prefabrication.
3. Structure characteristics
PP type precise welding
manipulator consists of column, lifting slide unit, rotation
roller, the column fixed on the bottom bracket, through turn round
organization can turn ± 90° by manual, at the front of lifting
slide along fixed a set of assistance compress tightly
organization, easy to compress tightly the work piece in weld the
process, lend support to the pressure is 450kg, on the side column
has a horizontal beam for reserving to install welding control
organization.
Turn roller is divided
into powered part and idle part, powered part with column fixed on
the bottom bracket, the reducer is a kind of special model which
adopt to apply to pipe prefabrication product, can adapt the pipe
diameter reach Ø50-600mm, its motor power is 0.75kw, electric
voltage is three phase 240V, 60Hz. The idle part doesn't equip
motor, mainly prop up the work piece, another the speed is adjust
by AC INVERTER to realize step-less speed adjustment with digital
display that the customer can preset parameters.
The electricity of this
set equipments control the system orientation communicate three
phase 380V, 50Hz of power supply request, Roller top end leaves
ground to be apart from for the 650mm, the customer can increment
or decrease mat piece according to the size of the work piece
during welding.
![]() | ![]() |
Pinch type welding rotator for small pipe
|
Control box and electrical control system
|