|
[China]
Trade Verify
Address: No.2 Building 13, No. 6 Fengxi Road,Caijiagang Town, Beibei District,Chongqing,China
Contact name:Elva Zhang
Allwin Machine & Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
Static Discharging 200L Wet Grinding Mill Paint Grinding Machine Chemical Fiber SS304 Steel
The main introduction of Wet Grinding Mill
1. The compact and stable structure : the motor is placed on the upper part, the grinding chamble is placed on the lower part, and the total height of the equipment is low. More than 20L large model sander with cylinder slide rail for easy maintenance.
2. Double end mechanical seal: It has 2 patented technologies, with forced coolant, sealing ring resistant to 1600 kinds of solvents, coolant is compatible with materials, no pollutants, reliable operation.
3. Discharging separation system :Large flow, nonclogging: dynamic hollow rotor-super large area slot cylinder separator uses dynamic centrifugal force separation principle.Use of extremely small grinding beads ( 0.3 to 3 mm).No export blockage occurs under high flow conditions. Good heat dissipation, narrowest particle size distribution.
4. Grinding inner chamble : It has two patented technologies: chamble cooling and disassembly. The chamber volume is from 0.6-300L. The materials are stainless steel, alloy steel, ceramic, hard alloy, polyurethane, etc.
5. Operation control: basic button type of operation column, more integrated higher control system and PLC Allwin data acquisition hardware and software system, and more process control and process optimization system.
The main techinical data:
| No | Main parameters | SP250 | Note |
| 1 | Explosion-proof motor kW | 55 kW ( Ex) | |
| 2 | Effective volume of grinding chamber (L) | 250 | |
| 3 | Water pressure (MPa) | 0.3 | |
| 4 | Cooling water consumption (L/min) | 2.5 -3m3/h | Advise offer the Cooling water less 10°C |
| 5 | Dimensions:L*W*H (mm) | 2100*900*2000 | |
| 6 | Weight (kg) | 3000 |
The main Configuration instructions:
| No | Main parts materials | SP250 explosion-proof | Notes |
| 1 | External cylinder | 304 stainless steel | |
| 2 | Internal cylinder | 9Cr18Mo alloy steel | customized service offered |
| 3 | Dispersing shaft | 40Cr with hard chromium plating | |
| 4 | Dispersing disk | Cr12Mov alloy steel | |
| 5 | Feeding and discharging end covers on the cylinder | 304 stainless steel | |
| 6 | centrifugal separator and pins | 304 stainless steel and YG6 pegs | |
| 7 | Static discharge screen ring | Stainless Steel Wire Wrapped Screen.Gaps: 0.5mm. | |
| 8 | Mechanical seal | double end mechanical seal with mandatory lubricating-cooling system | |
| 9 | Feeding pump | 1.5” ARO diaphragm pump; | |
10 | Appliance configuration | Explosion-proof machine, suitable for water/oil based materials, motor 55kW. Explosion-proof parts: operation column,electrical appliance boxes;electric contact pressure gauge, temperature,solenoid valves.operation manner: (button type) | |
| 11 | Fasteners and connecting parts | Stainless steel clamp-type connecting parts | Quick and convenient |
The Application filed:
The Custome workshop:
The package and shipping: Be covered with anti-abrasion film and then packed in wooden boxes, then seashipping by FCLor LCL.
The After sales service:
1. Video instructions for installation and commissioning, if need, we will arrange engineer to your factory.
2. 12-24H feedback any customers questions, firstly offer the video help you solving, if need, arrange maintenance engineer for you.
Note:
1.We will recommend the suitable bead mills according to your
information and demand, such as industry, fineness, temperature,
viscosity,production capacity etcs.
2. The Materials of inner chamber and Dispersing disks can be
chosed according to your different grinding materials and
industries.
3. The control system will be matching of different demand, such as
PLC or traditional Button type.
If need more detailed information and Price, please don't hesitate
contact us, Also Warmly welcome to visit us.
