Active Member
|
[China]
Address: 6th Floor, Block A, Jinfulai Building, No.49-1 Dabao Road, Baoan District, Shenzhen 518100, China
Contact name:Philip Zhang
Shenzhen Createk Technology Co., Ltd |
|
|
Model Name: ITBB801-P
Bluetooth beacon ITBB801_standard_52810_waterproof
Product Overview
ITBB801 is a bluetooth beacon based on a low-power bluetooth chip launched by our company. It is powered by two ER14250 batteries and can be used for up to 5 years.
ITBB801 can broadcast UUID, Major, Minor, RSSI, battery power, Bluetooth name, Bluetooth MAC address and other information, among which UUID, Major, Minor, Bluetooth name can be set through the mobile APP.
The broadcasting distance of ITBB801 can reach 80 meters, and the use of 3M glue can facilitate installation and fixation.
The ITBB801 firmware is divided into connectable and non-connectable types. The connectable type can change the Bluetooth beacon parameters through the mobile phone connection at any time, and the non-connectable type can only connect and change the parameters within 30 seconds of powering on the Bluetooth beacon.
ITBB801 default model does not have temperature and humidity sensor and acceleration sensor, if necessary, please contact our company sales.
Specification:
Hardware Parameters
| Hardware parameters | |
| Antenna | PCB Antenna |
| Battery | ER14250 2*1200mAh |
| Voltage | 3.6V |
| Dimensions (D×H) | 53.86*24.93mm |
| Wireless Performance | |
| Wireless standard | Bluetooth ® 4.2 |
| Frequency range | 2400MHz---2483.5MHz |
| Data rate | 1Mbps |
| Modulation mode | GFSK Modulation |
| Encryption | AES HW Encryption |
| Transmission power | Tx Power -20 to +4 dBm in 4 dB Steps |
| Reveiving sensitivity | -93dBm at 1 Mbps BLE |
| Work mode | Peripheral |
| Other | |
Environment | Working temperature: -40℃~85℃ |
| Storage temperature: -40℃~85℃ | |
| Working humidity: 10%~90% Non-condensing | |
| Storage humidity: 5%~90% Non-condensing | |
| Temperature and humidity indicators(for Bluetooth beacons with temperature and humidity sensors) | |
| Measurement accuracy of humidity | ±1.5 %RH |
| Humidity measurement resolution | 0.01 %RH |
| Temperature measurement accuracy | ±0.1 ℃ (20℃-60℃) |
| Temperature measurement resolution | 0.015 ℃ |
| Temperature measurement range | -40~125 ℃ |
Battery life
(dBm) | Broadcast distance (m) | Broadcast intervals (ms) | Average current ( | Battery life (year) |
4 |
70 | 100 | 260 | 1.05 |
| 500 | 50 | 5.48 | ||
| 1000 | 30 | 9.13 | ||
0 |
50 | 100 | 200 | 1.37 |
| 500 | 30 | 9.13 | ||
| 1000 | 25 | 10.96 |
Note:
The above data does not consider the battery self-discharge, the time is for reference only. Considering the self-discharge of the battery, the actual use time can be calculated by multiplying the table time by 0.6
The above data is the theoretical data of standard products without temperature and humidity sensors and acceleration sensors.
)
