Active Member
|
[China]
Address: 6th Floor, Block A, Jinfulai Building, No.49-1 Dabao Road, Baoan District, Shenzhen 518100, China
Contact name:Philip Zhang
Shenzhen Createk Technology Co., Ltd |
|
|
Bluetooth Beacon with Nordic 52810 broadcast UUID, Major Minor reach 80 meters using 3M glue acceleration sensor
Model Name: ITBB801-A
Bluetooth beacon ITBB801_standard_52810_acceleration
Product Overview
Our office and factory are located in Shenzhen China, our team members have worked in telecommunication industry for 15-20 years, so we have fully understanding of the insustry, we are not only provide the beacon and gateway, we have big wide of connections and cooperations with other telecom factories, we can help customer to do best solution of their application by not only provide the beacon and gateway, we will also provide other related products like smartwatch, industrial motherboard, smart phone, Tablet Pc, 4g/5g cpe and wireless communication products.
Most products of Bluetooth beacon are made by Nordic chipset in the market, we also have our Nordic 52832 and 52810 Beacon, but now days Nordic chipset supply is a big problem and price rise very high. In this case our company is the first to successfully adopt the domestic Bluetooth chipset in beacon products, after several months development, we successfully designed the beacon with domestic chipset and achieve the same performance, so even the bad covid situation may still last for years and chipset supply problem still exist we are capable to provide our customer more choices we can deliver with same quality beacon but lower cost and importantly no supply issue.
This Bluetooth beacon is designed by our engineer team which has more than 10 years experiences in this area, especially the RF design, our beacon product has the best performance of the antenna design compared with the most beacon product in the market.
ITBB801 is a bluetooth beacon based on a low-power bluetooth chip launched by our company. It is powered by two ER14250 batteries and can be used for up to 5 years.
ITBB801 can broadcast UUID, Major, Minor, RSSI, battery power, Bluetooth name, Bluetooth MAC address and other information, among which UUID, Major, Minor, Bluetooth name can be set through the mobile APP.
The broadcasting distance of ITBB801 can reach 80 meters, and the use of 3M glue can facilitate installation and fixation.
Specification:
Hardware Parameters
| Hardware parameters | |
| Model | ITBB801 |
| Antenna | PCB Antenna |
| Battery | ER14250 2*1200mAh |
| Voltage | 3.6V |
| Dimensions (D×H) | 53.86*24.93mm |
| Wireless Performance | |
| Wireless standard | Bluetooth ® 4.2 |
| Frequency range | 2400MHz---2483.5MHz |
| Data rate | 1Mbps |
| Modulation mode | GFSK Modulation |
| Encryption | AES HW Encryption |
| Transmission power | Tx Power -20 to +4 dBm in 4 dB Steps |
| Reveiving sensitivity | -93dBm at 1 Mbps BLE |
| Work mode | Peripheral |
| Other | |
Environment | Working temperature: -40℃~85℃ |
| Storage temperature: -40℃~85℃ | |
| Working humidity: 10%~90% Non-condensing | |
| Storage humidity: 5%~90% Non-condensing | |
| Temperature and humidity indicators(for Bluetooth beacons with temperature and humidity sensors) | |
| Measurement accuracy of humidity | ±1.5 %RH |
| Humidity measurement resolution | 0.01 %RH |
| Temperature measurement accuracy | ±0.1 ℃ (20℃-60℃) |
| Temperature measurement resolution | 0.015 ℃ |
| Temperature measurement range | -40~125 ℃ |
Battery life
(dBm) | Broadcast distance (m) | Broadcast intervals (ms) | Average current ( | Battery life (year) |
4 |
70 | 100 | 260 | 1.05 |
| 500 | 50 | 5.48 | ||
| 1000 | 30 | 9.13 | ||
0 |
50 | 100 | 200 | 1.37 |
| 500 | 30 | 9.13 | ||
| 1000 | 25 | 10.96 |
Note:
The above data does not consider the battery self-discharge, the time is for reference only. Considering the self-discharge of the battery, the actual use time can be calculated by multiplying the table time by 0.6
The above data is the theoretical data of standard products without temperature and humidity sensors and acceleration sensors.
)
