CC309 Eavesdropping on candid detector Wireless camera professional
detection equipment wireless signal detector Product Name | Eavesdropping and photographing signal detector |
Brand | Bo Chuang space time |
model | CCC309 |
Detection frequency | 1MHZ-6GHZ |
Place of use | Eavesdropping camera |
The functions are as follows:
1) With automatic detection function, the host can carry it with
you. When in danger, there are eavesdroppers and micro cameras. How
can the casino cheat...... The host will automatically detect and
prompt danger on you.
2) With signal strength indicator, you can quickly find the source
of the signal
3) Adjusting the potentiometer can adjust the sensitivity (increase
the sensitivity, enlarge the detection range or reduce the
sensitivity, shorten the detection range) to find out the radio
wave power supply faster.
4) Detection mode: 1. Laser detection 2. Vibration (mute) detection
3. Buzzer detection 4. LED display detection 5. Headset mute
detection
5) Low voltage prompt function, built-in rechargeable battery
Laser detection: the eye can see all the camera lenses directly
facing the current situation through the host window
Wireless frequency sweep: frequency detection range (1mhz-6ghz)
two
one
instructions:
A. Detection camera
1. Turn on the power switch and the indicator flashes a series of
red lights
2. Press the laser light switch once, and the 6 LEDs on the back of
the instrument begin to flash
3. Move the instrument up, down, left and right, laser scan the
surrounding environment, and observe with your eyes through the
host window. If there is a camera in front, you will find a strong
bright spot flashing (with vibration and sound prompt)
4. If you press and hold the switch continuously, the flashing
frequency of LED will be one level faster every 2 seconds, and the
fourth status indicator on the panel will flash once. There are 8
levels of choices, which can adapt to the preferences of all kinds
of people
5. Press the switch once to turn off the laser scanning function
B. Detect radio waves (radio cameras). Eavesdroppers, etc.)
Acoustic detection:
1) Turn on the power switch and the power indicator lights up (blue
light)
2) Moving left and right, if the red light flashes, there is a
sound prompt, indicating that there is a transmitter. When the
signal becomes strong, four LEDs light up at the same time, and the
sound will become larger and faster.
3) Pull out the antenna and increase the adjustment potentiometer
to expand the search range.
4) Gradually shorten the antenna, reverse adjust the potentiometer
to reduce the detection range, and finally find the transmission
source
5) You can also plug in headphones
Silent detection:
1) Push the power switch to the top, and the power indicator will
be on (blue light)
2) When there is a signal, only flashing lights and vibration.
3) Other operations are the same as above
C. Compass
This product specially enhances this function, which is very
important for professionals.
D: Battery low voltage prompt
When the built-in battery voltage is insufficient, the fourth
status indicator on the panel will flash continuously
5 to avoid interference, the detection shall be suspended when a
mobile phone is talking or other wireless transmitting equipment is
working
intended for:
People who often use bank cards
Hotel based business travelers
A beautiful woman who is easily photographed
People who often go to public entertainment places for consumption
People who often go to various shopping malls to try on
People who respect their own privacy and the privacy of others
People who contact and keep trade secrets
Anti candid and anti eavesdropping professionals
Scope of use:
Detect whether your car or office is equipped with wireless
eavesdroppers...
Detect whether the mobile phone eavesdropping or a (when standby,
Wugu sends out signals)
Detect whether your car is equipped with GPS tracking eavesdropper,
GPS positioning tracker...
Detect whether your working environment 'residential building has
roof base station radiation.
Detect SMS sending and receiving signal, mobile Internet access
signal, mobile switch and call signal
Detect the field strength of wireless network signal, mobile base
station signal and wireless monitoring system
Detect whether household appliances such as induction cooker leak
geomagnetic radiation harmful to human body
Detect whether there is a suspicious wire number in the environment
Detect whether there is strong radiation called "mobile phone
killer" in the environment
Detect more covert 508ghz wireless camera candid shooting, wireless
eavesdropper and wireless monitor signals
Check wireless pinhole cameras in hotels, toilets, hotels,
entertainment places and dressing rooms
Business negotiation, school invigilation sites, factories,
military facilities or government agencies to prevent candid
shooting and eavesdropping
ATM withdrawal, cinema, concert, art museum or museum, etc
When purchasing a building, first detect whether there is
electromagnetic radiation harmful to human health
Product technical parameters:
The distance of laser detection camera is 10cm-10m (red light
flashes with naked eyes)
The distance of radio wave detection camera is 5cm-10m (the
distance is determined by the transmitting power of the camera)
The power is 500mw-200mw and the detection distance is 30-50cm
The power is 300mw-600mw, and the detection distance is 100-200cm
The power is 800mw-1200mw, and the detection distance is
300cm-1000cm
450mah lithium polymer battery built in power supply
Consumption current 8mh
Detection laser wavelength 920nm
Acceptance frequency range: 1mhz-6500mhz
Special filter for optical lens
Material ABS
Size 93mm * 48mm * 17mm
Weight 58G
Scope of use:
Detect whether your car or office is equipped with wireless
eavesdroppers
Detect whether the mobile phone is eavesdropped or installed with
undercover software (send out signals without reason during
standby)
Detect whether your car is equipped with GPS eavesdropping device
and GPS positioning tracker
Detect whether your working environment and residential building
have roof base station radiation
Detect SMS sending and receiving signals, mobile Internet access
signals and call signals
Detect the field strength of wireless network signal, mobile base
station signal and wireless monitoring system
Detect whether household appliances such as induction cooker leak
geomagnetic radiation harmful to human body
Detect suspicious radio signals in the environment
Detect whether there is strong magnetic radiation called "mobile
phone killer" in the environment
Detect 1.2Ghz, 2.4GHz and more concealed 5.08GHz wireless camera
and wireless eavesdropper signals
Check wireless or wired pinhole cameras in hotels, toilets, hotels,
entertainment places and dressing rooms
Prevent eavesdropping at important meetings, business negotiations,
factories, military facilities or government agencies
Detect and prevent cheating by using communication equipment in the
examination room
ATM machines, cinemas, concerts, art galleries or museums, product
exhibitions, etc
When purchasing a building, first detect whether there is
electromagnetic radiation harmful to human health
instructions:
A. Detection camera
1. Turn on the power switch and the indicator flashes a series of
red lights.
2. Press the laser light switch once, and the 6 LEDs on the back of
the instrument begin to flash.
3. Move the instrument up, down, left and right, laser scan the
surrounding environment, and observe with your eyes through the
host window. If there is a camera in front, you will find a very
strong
The circular bright spot is flashing (pay attention to distinguish
metal, glass and other easily reflective objects).
4. If you press and hold the switch continuously, the flashing
frequency of LED will be one level faster every 2 seconds, and the
fourth status indicator on the panel will flash once. 8 levels in
total
Optional, can adapt to the preferences of all kinds of people.
5. Press the switch once to turn off the laser scanning function.
B. Detect radio waves (radio cameras, wiretaps, etc.)
Acoustic detection:
1) Turn on the power switch and the power indicator lights up (blue
light). Move the
detector left and right. If the red light flashes, there is a sound prompt,
indicating that there is a transmitter.
2) When the signal becomes stronger, the sound will become louder
and faster, and the four LEDs will light up at the same time.
3) Pull out the antenna and adjust the potentiometer to the maximum
to expand the search range.
4) Gradually shorten the antenna, reverse adjust the potentiometer
to reduce the detection range, and finally find the transmission
source.
5) You can also plug in headphones.
Silent detection:
1) Push the power switch to the top, and the power indicator will
be on (blue light)
.
2) When there is a signal, it will flash and vibrate immediately.
3) Other operations are the same as above.
A. Azimuth dial
This product specially adds this function, which is very important
for professionals.
B: Battery low voltage prompt
When the built-in battery voltage is insufficient, the fourth
status indicator on the panel will flash continuously
Tip: to avoid interference, when a mobile phone is talking or other
wireless transmitting equipment is working, the detection should be
suspended or turned off before detection.