|
[China]
Trade Verify
Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Contact name:Lynette Wong
KingPo Technology Development Limited |
|
Verified Suppliers
|
|
|
Zhaga book 18 -Annex B Mechanical drawing of the Mechanical-stop-gauge
5.1.1 Mechanical-stop-gauge
The Mechanical-stop-gauge is defined in Annex B. This gauge is used to verify whether the mechanical stop features of the LEX-M under test (see Figure 3-6) can withstand a torque of 5 Nm.
Zhaga book 18-Annex C Mech. drawing of the Contact-making-gauge-min and Contact-making-gauge-max
5.2.1 Contact-making-gauge-min
The Contact-making-gauge-min is defined in Annex C. This gauge is used to verify whether the LEX-R under test can mate with a LEX-M that is compliant with this specification and whether all contacts of the LEX-R under test make electrical contact with all contacts of a LEX-M that is compliant with this specification
5.2.2 Contact-making-gauge-max
The Contact-making-gauge-max is defined in Annex C. This gauge is used to verify whether the LEX-R under test can mate with a LEX-M that is compliant with this specification and whether all contacts of the LEX-R under test make electrical contact with all contacts of a LEX-M that is compliant with this specification
Zhaga book 18-Annex D Mechanical drawing of the Un-mating-torque-gauge
5.2.3 Un-mating-torque-gauge
The Un-mating-torque-gauge is defined in Annex D. This gauge is used to verify whether after 5 mating cycles of the LEX-R under test with the gauge the torque for un-mating is 1.0 Nm or more
