|
[China]
Trade Verify
Address: Zone A, Floor 3, Building 1, Houhai Xufa Science and Technology Park, No.8, Zhenxing Road, Loucun, Xinhu Community, Guangming New District, Shenzhen, Guangdong, China
Contact name:Naomi Zhang
Shenzhen Chebao Technology Co., Ltd |
|
Verified Suppliers
|
|
|
● Mitsubishi PLC + imported Panasonic servo control unit + four-probe design, high-end configuration, stable performance, long service life, and low failure rate.
● With a high-definition touch screen computer, human-computer interaction is simple and convenient.
● Reserved interface for connecting to the paper machine, which allows direct connection to the paper machine, saving labor costs.
● PLC + host computer control mode, with the host computer displaying and recording battery sorting data in real time.
● Fault information reminder function, including audible and visual alarms for quick fault diagnosis.
● Features manual parameter modification, allowing fine-tuning of each gear or adjustment using the one-key modification function.
● The slanted design of the sorting gear and the material opening facilitate material collection and improve production efficiency.
● Aluminum alloy structure with electrostatic spraying process, making it scratch-resistant, rust-proof, and anti-static.
● This battery sorting machine is suitable for automatic sorting equipment used for testing the voltage and internal resistance of cylindrical batteries of various specifications.
● A variety of battery types are available: 18650, 21700, 26650, 26700, 326700, 32700.
● Can sort more than 4,000 cylindrical batteries per hour.
● The operation interface is simple, with a one-key generation function, only requiring the initial voltage resistance and the corresponding interval to complete the parameter setting.
| Tester Specifications and models | ||
| Brand | Model | Sorting accuracy/Resolution |
| HLOK | 3561 | Voltage:±3 dgt Internal resistance:±5 dgt |
| HOPETECH | HP3561 | Voltage:±0.3% rdg Internal resistance:±0.05% rdg |
| HK3561 | Voltage:±0.3% rdg Internal resistance:±0.05% rdg | |
| Production efficiency | 50-70PPM | Air source specification | 1/CFM |
| Applicable battery specifications | Diameter: 18-32; Length: 65-70 | Transmission mode | belt transmission |
| Sort the gears | 4+1 | Product loss rate | 0 |
| SBM Series | HIOKI3561/HOPE350 | Frame material | Aluminium alloy |
| Voltage accuracy | 0.1% (according to the internal resistance meter) | Machine Dimensions | 1600*600*1650MM |
| Internal resistance accuracy | 0.5%(depending on internal resistance meter) | Machine Weight | 220KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Cylindrical battery sorting |
1.Operating interface
Using 7 inch touch screen, the gear parameter setting is simple and quick.Display sorting data in real time.
2. Inspection and testing organization
4 Probe design, positive and negative electrode detection at the
same time, with brand internal resistance meter, more accurate test
data.
According to the test parameters, the upper computer analyzes the
data and sorts the cells to the designated channel.
3. Baffleless design
With no baffle design, smooth operation without lag. The sorting state of the cell at the arrival position is clearly visible. Flexible belt design
The battery cell is put into the bin -- the test wheel runs to the test position -- the test cylinder moves -- the test needle presses to the battery cell --
the tester reads the data -- transfers to the computer -- the computer matches the gear -- the battery cell is transferred to the sorting belt --
the sorting belt runs to the specified gear -- the gear cylinder moves to push the battery cell out
