Shenzhen Chebao Technology Co., Ltd |
Verified Suppliers
|
|
● This lithium battery spot welding machine adopts transistor welding power supply, the current rises fast, and achieves high quality welding in a short time.
● Three welding modes can be adjusted: constant voltage, constant
current and constant voltage current.
● Compact power supply, small size, large power, no need to weld
transformers.
● Microcomputer technology control, real-time monitoring of welding
voltage, current, resistance waveform.
● 5.7 inch HD LED display, device parameter adjustment is convenient
and intuitive, multiple programs can be pre-stored.
● Pure electric no cylinder, low noise, fast speed, stable pressure,
does not affect the welding quality due to external air source
interference.
● Independently developed precision welding head, the pressure can
be accurately adjusted and controlled according to the thickness
and material of nickel sheet to achieve precision welding.
● Double guide rail thickening, the chassis is stable and firm, not
easy to deformation.
● Welding The welding head can be moved up and down, and the welding
head can be moved according to the size of the battery pack for
easy welding.
● The table guide rail can be pushed and pulled left and right, and
the stroke is 750*350mm.
● The spot welding process does not need to push the battery pack,
saving energy and fast, the platform can carry 60KG, especially
suitable for large battery pack welding.
● The guide rail is convenient to move, saving time and labor,
greatly shortening welding time and improving manual welding speed.
● Energy saving and environmental protection, stable and efficient,
low power consumption of equipment.
Welding mode | Single side double point horizontal welding | Table top and weld head height | 250 (Maximum pitch adjustable) |
Welding thickness | 0.02-0.5MM | Welding power supply | Transistor |
Supply current | 5000A | Welding speed | 180P/M |
Spot welding method | Bump welding/tip welding | Welding pressure | 5KG/F |
XY axis travel | 750*350MM (Manual slide) | Welding pressure | 700*1200*1450MM |
Driving mode | Driving mode | Machine Weight | 70KG |
Power source specification | Single-phase 220V50/60HZ | Application scenarios | Battery welding |
1.Keep the distance between the end face of the welding needle and the end face of the battery 3 to 5MM.
2.For the battery specifications in a battery pack, the spot welding surface must be flush and the height as consistent as possible.
3.Clean the end face of the spot welding needle regularly.
1. Electric control
No additional air source required, low noise, fast welding speed, and stable pressure.
2. Guide rail design
Double rail thickened design, stable and firm chassis, not easily deformed. The guide rail can move left and right, and the welding head is also equipped with a guide rail design, suitable for assembling and welding large batteries, saving time and effort.
3. Transistor welding power supply
Welding energy output is the most stable power source, displaying real-time welding voltage and current waveforms. The current rises quickly and can achieve high-quality welding in a short period of time.