|
[China]
Trade Verify
Address: 3F, Bldg 6,Hanhai Da Tianliao Technology Park, Yutang Subdistrict, Guangming, Shenzhen, China
Contact name:Jessie
Shenzhen TICO Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
2L Planetary Vacuum Mixing Equipment for Pouch Polymer Battery
Brief Introduction
It’s used for mixing dispersion of various common battery powder and liquid to achieve uniform battery slurry, especially for the high viscosity technological process. The viscosity interval of applicable operating conditions is ≤1200000 cP.
Key Features
● Form of jacket for temperature adjustment, the single-layer jacket for bucket wall is used for cooling or heating; and the single-layer jacket for bucket bottom is used for cooling or heating.
● Over temperature alarm system, safer and smarter
● Operation failure stop: the frequency converter is self-provided with overload, overcurrent, overvoltage, leakage of electricity, short-phase protection
● Variable cross-section Non-prismatic mixing design can make slurry get better mixing effect.
● Touch screen, simple operation, high automation.
Technical Parameters
| Model | STC-XJB-2L |
| Effective volume | 2L |
| Low bucket component | |
| Bucket inner diameter | 180mm |
| Bucket inner depth | 150mm |
| Bucket material | SUS 304 stainless steel |
| Jacket for temperature adjustment | G3/8", equipped with an open union joint, with pressure capability of jacket for ≤0.4MPa |
| Design ambient temperature | -10~+120°C |
| Mixing component | |
| Speed of mixing propeller | 8~76rpm |
| Speed of planetary gearbox | 5~52rpm |
| Diameter of mixing propeller | 94mm |
| Quantity of mixing propeller | 2 pieces |
| Distance between propellers | 6±1mm |
| Distance between propeller and bucket wall | 3mm |
| Distance between propeller and bucket bottom | 2~3mm |
| Dispersed component | |
| Speed of dispersion | 450~4450rpm |
| Wiped-wall component | |
| Material of wiped-wall plate | PTFE |
| Speed of wiping wall | Consistent with the speed of planetary gearbox |
| Base and lifting component | |
| Lifting mode | Electric lifting |
| Lifting travel | ≤225mm |
| Upper bucket component | |
| Feeding hole of powder | DN40 feeding port |
| Feeding hole of liquid | DN40 feeding port |
| Spot-lighting | One DN40 |
| Vacuum connector | One G1/2 inner thread |
| Voltage | AC 3×380V±5﹪, 50Hz |
| Vacuum holding | -0.098Mpa, it is higher than -0.085Mpa after24 hours holding, without leakage to bucket. |
| Power | 3Kw |
| Dimension | L1000 * W700 * H1835mm |
| Weight | ≈550kg |
Warranty
1 year warranty with lifetime support. Man-made damage is not covered.
FAQ
1. Are you a manufacturer?
A: Yes, our factory is located in Shenzhen, China.
We have more than 10 Year experience for manufacturing battery lab research equipment. We own a professional R&D department.
2. Do you accept customized product?
A: Yes, most of our products can be customized to meet different
requirements.
3. Will you provide test video before dispatch?
A: Yes, we take test video for every equipment before dispatch,
which will display how to use it.
4. Can you offer overseas installation service?
A: Yes, we can dispatch professional engineer for on-site
installation service.
