Active Member
|
[China]
Address: 15/F, Tower 3, Excellence City, No.128, Zhongkang Rd., Shenzhen, CHINA 518049
Contact name:Neware Support Team
Neware Technology Limited |
|
|
Neware 8 Channel Battery Cycler Cathode Materials Research Analyzer
BTS 4000 has been served for the market for more than 10 years, providing the most reliability and flexibility for your battery testing activities.
The Neware battery tester models listed below here in different categories are the most popular ones chosen by our customers, so if you belong to one of the following category, then it might be easier for you to find out the battery tester that meets your requirement based on your peers’ choice.
Sensitive galvanometer is used for students to check weak current or tiny voltage in DC circuit in the lab . It is a kind of high sensitive magnetoelectric instrument , which can measure the tiny current .
This 8 Channels Coin Cell Analyzer 5V10mA provides most applications in battery testing fields such as electrode materials research, battery performance test , small - scale battery formation , capability grading , battery pack testing and etc .
20 set of mA Neware battery testers can be put in one rack
CT-4000 Multi Range mA Battery Testing System , characterized with 0.05 percent of FS accuracy and down to uA capability , enables users to perform DCIR tests , dQ / dV and other basic tests on three - electrode system .
| Voltage | Per Channel Voltage Range | 0V - 5V |
| Discharge Min Voltage | 0V | |
| Accuracy | 0.05 percent of FS | |
| Stability | 0.05 percent of FS | |
| Current | Per Channel Current Range | Range1 , 5uA – 1mA Range2 , 1mA – 5mA Range3 , 5mA – 10mA |
| Per Channel Current Range | Range1 , 5uA – 1mA Range2 , 1mA – 10mA Range3 , 10mA – 20mA | |
| Per Channel Current Range | Range1 , 5uA – 1mA Range2 , 1mA – 25mA Range3 , 25mA – 50mA | |
| Accuracy | 0.05 percent of FS | |
| Stability | 0.05 percent of FS | |
| Power | Stop current | Range 1 , 2uA Range 2 , 0.01mA Range 3 , 0.02mA |
| Stop current | Range 1 , 2uA Range 2 , 0.02mA Range 3 , 0.04mA | |
| Stop current | Range 1 , 2uA Range 2 , 0.05mA Range 3 , 0.1mA | |
| Stability | 0.1percent of FS | |
| Data Recording | Record Condition | Min Time - 100mS |
| Min Voltage - 10mV | ||
| Min Current - Range 1 , 2uA Range 2 , 0.01mA Range 3 , 0.02mA | ||
| Min Current - Range 1 , 2uA Range 2 , 0.02mA Range 3 , 0.04mA | ||
| Min Current - Range 1 , 2uA Range 2 , 0.05mA Range 3 , 0.1mA | ||
| Record Frequency | 10Hz | |
| Charge | Charge Mode | CCCharge , CVCharge , CCCVCharge , CPCharge |
| End Conditon | Voltage , Current , Relative Time , Capacity , -deltaV | |
| Discharge | Discharge Mode | CCD , CPD , CRD |
| End Condition | Voltage , Current , Relative Time , Capacity | |
| Pulse | charge | CCC , CPC |
| Discharge | CCD , CPD | |
| Min Pulse Width | 500ms | |
| Automated Switch | Automated swith from charge to discharge for each pulse | |
| End Condition | Voltage, Test Time | |
| Cycle | Loop Measure Range | 65535 times |
| Max Steps Per Loop | 254 | |
| Nested Loop | Nested loop Function , Max Support 3 Layers | |
| Protection | Software Protection | Power - down Data Protection |
| Off - line Testing Function | ||
| Setting Protection Condition,Setting Parameter - Low Voltage limit , Upper Voltage limit , Low Current limit , Upper Current limit , Delay Time | ||
| IP protection level | Protection level IP20 | |
| Voltage and Current Testing Sample | 4 - wire connecting | |
| Dimensions | 3U , 480 – 404 - 130mm | |
