Anji LianSheng Furniture Co., Ltd |
Verified Suppliers
|
|
Packing and Delivery
Quantity(Pieces) | 1-1000 | 1000-5000 | More than 5000 |
Lead Time (Days) | 35 | 45 | To be negotiated |
FAQ
Guide to Choosing a Comfortable Office Chair for Summer
As the temperature rises in summer, it is particularly important to
choose an office chair with good breathability. Here are a few key
factors for choosing a comfortable office chair for the summer.
1. Breathability
In summer, due to the expansion of body pores, the body's breathing
rate accelerates, so when choosing an office chair, you should
consider the breathability of the seat. Office chairs made of mesh
fabric usually have good breathability, allowing the body to
breathe freely and reducing the discomfort caused by heat 2. In
addition, mesh office chairs in light green, light gray, light blue
and other light colors not only have good breathability, but are
also easy to match with the office environment.
2. Material
The temperature changes greatly in summer, so you should pay
attention to the adaptability of the material when choosing an
office chair. It is recommended to choose an office chair made of
mesh fabric, because the mesh fabric is elastic and soft, can
tightly support the back, and can adjust the curvature of the back
according to body needs3. In addition, although leather fabrics are
soft and skin-friendly, they have poor breathability and are not
recommended for use in summer.
3. Design
The design of summer office chairs also needs attention. For
example, some chairs come with removable headrests that allow the
cervical spine to be fully supported and rested. At the same time,
the material of the headrest should have good breathability to
avoid damage by sweat and grease. In addition, some office chairs
have tilt adjustment functions, which can make the sitting posture
more casual and comfortable, helping to reduce fatigue caused by
long working hours.
4. Comfort
Comfort is an important consideration when choosing an office
chair. The seat cushion should conform to the curves of the human
body's hips and thighs to avoid increasing the burden on the
tailbone or affecting blood circulation in the legs. At the same
time, the seat cushion should have good resilience to ensure
comfort. The design of the backrest should conform to the natural
curve of the spine and provide appropriate support for the chest,
waist and neck.
5. Security
Safety is a factor that cannot be ignored when choosing any
furniture. Especially for summer, sitting on a chair for long
periods of time can cause skin problems, so the chair should be
made of breathable and comfortable materials. In addition, the
choice of material for the lifting chassis, the core part of the
chair, is also very important. Thickened explosion-proof steel can
ensure the stability and safety of the chair.
6. Adjustability
A good office chair should have rich adjustability so that the
appropriate sitting posture can be adjusted according to personal
height, leg length, waist length and other factors. This ensures
comfort and reduces the risk of occupational diseases. For example,
the adjustable armrest height, seat depth and height range of the
lifting air pressure rod directly affect the suitability of the
chair.
To sum up, when choosing a comfortable office chair in summer, you should pay attention to its breathability, material, design, comfort, safety and adjustability. Hopefully this information will help you find an office chair that’s both comfortable and secure for the summer.
Office chair buying guide
When purchasing office chairs, especially safety-focused
explosion-proof lifting chassis office chairs, you need to consider
the following key points:
1. Safety of air pressure rod
The pneumatic rod is the core component of the lift chair, and its
quality and safety are directly related to the safety of the seat.
The strength of the pneumatic rod is also very important and is
usually divided into 4 levels. The higher the grade, the heavier
the pneumatic rod and the better the safety.
2. Chassis material and design
The choice of material for the chassis is crucial to the safety and
stability of the chair. Generally speaking, steel or stainless
steel chassis have better explosion-proof performance, while some
higher-priced chairs may use trays made of aluminum alloy, carbon
fiber and other materials. Explosion-proof chassis usually add a
layer of steel plate directly opposite the top of the gas rod to
prevent explosions caused by gas leakage. In addition, the
thickened design of the chassis can also provide additional safety.
3. Presence of explosion-proof steel plates
The explosion-proof steel plate is directly opposite the top of the
gas pole. There is a layer of steel plate blocking it. You can see
it by shining a flashlight. It’s not expensive technology, some are
built into the pallet, and some are a separate steel plate. This is
something that heavy people should consider when buying a lift
chair.
4. User evaluation and experience
Checking out reviews and experiences from other users can help you
understand how well a product actually performs and lasts. User
feedback is an important basis for evaluating a product and can
help you avoid potential problems and choose office chairs that
truly meet your needs.
To sum up, when purchasing an office chair with an explosion-proof lifting chassis, you should focus on the certification of the pneumatic rod, the material and design of the chassis, the presence, brand and after-sales service of the explosion-proof steel, as well as user reviews and experience. By considering these aspects comprehensively, you can choose an office chair that is both safe and comfortable more wisely.
Adjusting the height of the armrests of your office chair is an important step in improving work efficiency and physical health. Correct armrest height provides necessary arm support,
Reduces muscle fatigue and pain. Here are the steps and considerations for correctly adjusting the height of your office chair armrests.
Find the adjustment handle
First, you need to find the adjustment handle of your office chair.
This handle is usually located under the chair or near the armrest.
If you can't find this handle, you can
Please refer to the following suggestions:
Office chairs will usually have one or two handles under the seat
for adjusting the height of the armchair.
If there are two handles underneath the chair, one might be used to
adjust the height of the chair and the other to adjust the angle of
the chair's backrest.
Adjust the handle
After finding the adjustment handle, you can adjust it according to
the following methods:
When the chair has handles under the seat, simply lift the handles
upward when adjusting the height of the armchair. The high-pressure
gas in the air rod will rebound after being compressed, and the
seat will naturally rise. When you want to lower the armchair, turn
the handle upwards and the high-pressure air rebound in the air rod
is blocked, which naturally lowers the body of the chair.
Confirm comfort level
When adjusting the armrest height, make sure your arms can relax
naturally and remain parallel to your desk. You can make
adjustments based on the following suggestions:
Adjust the height of the armrests so that your arms are just
slightly raised at your shoulders.
If you are typing or performing similar tasks at a desk, raise the
armrests until they keep your arms level with the desk. If there is
no need for arm support, the armrests can be removed or lowered so
as not to impede your movement.
Precautions
When adjusting the height of the armrests, you also need to pay
attention to the following points:
Adjust it to the height of your desk and chair, as well as your own
height. Generally speaking, when we sit on an office chair,
people's eyes should be at the same level as the computer so that
they will not be too tired when looking at the computer.
The adjustment height should also be moderate and not too low to
prevent people from sinking into the office chair. But it can't be
too high, otherwise it will be hard on the eyes. Afterwards, we
should make sure we can sit up and maintain good sitting posture.
With the above steps and precautions, you can correctly adjust the
armrest height of your office chair to improve work efficiency and
physical health. Remember to regularly check and adjust the armrest
height to suit your daily work needs.
Choosing the right office chair is very important for people who sit in front of the computer for long periods of time. A good office chair can provide necessary support, help maintain correct sitting posture, and reduce physical fatigue and discomfort. Here are a few key considerations.
1. Ergonomic design
Features of ergonomic chairs: Ergonomic chairs are designed to
simulate the natural curves of the human body, including the head,
neck, back, waist and legs.
They usually have features such as adjustable headrests, lumbar pillows, armrests and seat heights to accommodate people of different heights and weights. In addition, the back of an ergonomic chair is usually S-shaped, which can effectively support the waist and back and reduce spinal pressure.
Reasons to choose an ergonomic chair: Ergonomic chairs can provide multiple dimensions of protection, including support for the spine, waist, shoulders and arms. They can help correct sitting posture, reduce muscle fatigue and tension, and improve work efficiency. In addition, ergonomic chairs usually use environmentally friendly materials that are both skin-friendly and breathable.
2. Materials and quality
The importance of material: The material of an office chair
directly affects its comfort and durability. Commonly used
materials include mesh, sponge, leather, etc. The mesh material has
good breathability and is suitable for summer use; the sponge
provides additional cushioning effect; and the leather provides a
high-end feel and is easy to clean.
Quality Check: When purchasing an office chair, you should pay attention to check its material and workmanship. For example, the frame of the chair should be strong and the legs should be stable and not prone to danger. Additionally, the air wand should be safety-certified and have no visible scratches or damage.
3. Adjustment function
The importance of adjustment functions: A good office chair should
have multi-directional adjustable functions, including chair back
height, chair back angle, lumbar support adjustment, armrest
adjustment, etc. This can adapt to different people's body shapes,
allowing them to stay comfortable at any time when switching
between different postures such as working and resting.
4. Security
Safety considerations: When choosing an office chair, you should
pay attention to its safety. For example, air wands should be
safety-certified and have no visible scratches or damage. In
addition, the stability of the chair is also an important factor.
The chair legs should be stable and not prone to danger.
5. Brand and price
Brand influence: Some well-known brands of office chairs are
favored by consumers because of their excellent quality and design.
Choosing products from well-known brands can guarantee a certain
quality and after-sales service.
Price considerations: The price of office chairs can be selected according to personal budget and needs. If the budget is limited, you can choose
Reasonably priced styles. If you have the budget, consider higher-priced ergonomic chairs, which often offer more features and better materials.
To sum up, choosing the right office chair requires considering factors such as ergonomic design, materials and quality, adjustment functions, safety, and brand and price. Hopefully the above information will help you make an informed choice.
Reasons to choose office chairs with velvet seat covers
Office chairs with velvet seat covers are popular for their unique
material and design features. Here are a few of the top reasons to
choose an office chair with a velvet seat cover:
1. Comfort
Velvet is a soft, comfortable fabric, and seat covers made from it
can provide excellent touch and sitting comfort. This fabric is
often used in high-end furniture because it conforms to the curves
of the body, providing good support and reducing fatigue from
sitting for long periods of time.
2. Dustproof and easy to clean
Office chairs with velvet covers often come with removable seat
covers, which makes cleaning easier. This is especially important
for offices that frequently deal with clients, as it maintains a
hygienic and professional image of the office chair.
3. Beautiful and fashionable
Office chairs with velvet seat covers usually have a modern and
minimalist design style and can blend well into various office
environments. In addition, velvet fabrics can also show rich colors
and textures, making office chairs a part of the office decoration.
4. Waterproof and durable
Many office chairs with velvet seat covers are waterproof and
non-slip, which is important in an office environment where drinks
or snacks are often required. Additionally, the abrasion and high
temperature resistance of velvet fabric also makes these seat
covers more durable.
5. Technical support and after-sales service
When choosing an office chair with a velvet seat cover, you also
need to consider whether the manufacturer provides technical
support and after-sales service. High-quality after-sales service
can ensure that problems can be solved in time when they arise,
which is crucial to improving work efficiency and user experience.
To sum up, choosing office chairs with velvet seat covers can provide excellent comfort, easy cleaning, beautiful and fashionable, waterproof and durable, as well as professional technical support and after-sales service. These factors combine to make office chairs with velvet covers an ideal choice.