Active Member
|
[China]
Address: Building 7#,Zone A,2nd Area,Liandong U Valley,,Jiansha Rd, Danzao Town, Nanhai District,Foshan,City, Guangdong Provice, China
Contact name:Rita Xie
Foshan Bester Access Control Smart Equipment Co.,Ltd |
|
|
Slim Top Quality Speed Gate With Face Recognition Pedestrian Speed Swing Barrier Turnstile Gate For Disabled
Anti-Collision High Quality Wholesale Swing Turnstile Swing Barrier Customization Biometric Door Access Control
Introduction:
The Sliding Barrier Turnstile Speed Gate --- can be compatible with IC card , ID card ,barcode card , fingerprint reading card recognition device used for staff, provide civilized , orderly access methods; effectively manage the access of staff . Can be widely used in the station, wharf subway , factories, office building , hotel , clubs, intelligent community , enterprises and institution that need intelligent access management.
Features:
1. Problem-self-checking function.
2. Many options of working ways: Bi-direction card reading; One
direction card reading and another no reading; One direction card
reading and another freely. And single direction photocell
controlled passing and close. Working ways can be set in the
control panel.
3. When power off, arm open automatically and power on again, arm
will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to
close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass
within regulated time period, full-height turnstile will cancel
this passing right. And the regulated time period for passing can
be set by managers.
6. If passenger pass without card read or valid card read, flap
barrier will alarm untill passenger get back from the Swing barrier
and then take a valid card to be read for passing.
7. Swing barrier is with 485 interface for long-distrance control
concern.
8. Anti-rush function: If there is no open single, arm will be
holding tightly.
9. Double anti-clipping function: Photocell anti-clipping and
mechanical anti-clipping. When passenger is going through the Swing
barrier, photocell will detect out this situation and will not
close. After passenger passed, arm will close automatically. During
its reposition, if arm meets any obstacle, arm will get back
automatcially or stop working for a while with very slight force.
Also it will alarm.
10. Swing barrier is with standard electrical interface for the
integration of various readers and writers.
11. Swing barrier can count how many passenger has passed and will
show it in the LED display.
12. Direction display to guide passenger which direction is to go.
13. Card-reading with memory or without memory function.
14. Swing barrier can control the population inside in the control
of software
Available areas:
Public transportation (Train Stations, Metro Stations, etc…)
Government Offices
Public Offices
Business Building Centers
Schools
Hospitals
Stadiums
Sports Centers
Industrial Buildings
SPECIFICATIONS:
| Framework | 304# Stainless Steel (default), 201# or 316# Stainless Steel or paint (optional) |
| Thickness of ply | 1.5mm |
| Finish | brushed surface, polishing surface |
| Shell's size (L*W*H) | 1400*120*1020mm |
| Swing arm material | Tempered glass or Acrylic (optional) |
| Stretching out swing length | 260mm~600mm |
| The inductive card reader dimension | equipped with the standard mounting brackets or tailor. |
| Machine center | Germany technological motor |
| Power voltage | AC220V±10%, 50Hz±10% |
| Driver motor | DC36 servo motor |
| Main-board voltage | 12V DC |
| In-built Infrared | 6 pairs/passageway |
| Passing speed in normally open mode | 50 persons/min |
| Passing speed in normally closed mode | 40 persons/min |
| Passage Width | 600mm |
| Swing arm transmission angle | 180° |
| Swinging direction | unidirectional or bi-directional |
| Opening / closing time | 1 seconds |
| The time required to running state after power on | 3 seconds |
| Automatic reset time after the failure | 1 seconds |
| Mean time to failure | min. 10 000 000 |
| Operation temperature | -10℃ ~ +70℃ |
| Relative humidity | less than 95% not condensed |
| Working Environment | Indoor/Outdoor (with rain-tent cover) |
| Input port | relay dry contact signal; +12V level signal, pulse width >100ms, DC12V pulse signal |
| Communications port | RS232/ RS485 electric standard, communications range ≤1200m. Available to connect with external CAN BUS and Ethernet |
Standard functions & features of Swing Turnstiles Gate
| 1. | Infrared sensor to prevent pinch pedestrians. |
| 2. | Alarm function, in case of illegal intrusion and reverse intrusion. |
| 3. | Anti-breakthrough function. The gate is locked automatically until opening signal received. |
| 4. | Anti-trailing function, the turnstile will lock if someone wants to burst in without swiping the RFID card. |
| 5. | The whole system runs smoothly, long-life performance, high operation dependability and fast response. |
| 6. | Automatic reset function. If the user fail to pass within the
prescribed time (default time is 5 seconds), the system will cancel
the authority of the current user automatically. |
Service:
1. Any inquiries will be replied within 24 hours
2. Professional maufacturer. Welcome to visit our factory.
3. OEM/ODM available
You can have your own fashionable design at reasonable&
competitive price
5. High quality:
1.) All products are stictly checked in warehouse before packing
2.) All products are well-packed before shipping
3.) All products have 2 years warranty
6.Payment:
T/T, Western Union, Paypal, Moneygram can be accepted
7. short lead time:
Sample order in stock, and 3--7 days for bulk production
8. Shipping:
Cooperate well with DHL, EMS, UPS, FEDEX, China Air Post
You can also choose your own shipping forwarder
