Active Member
|
[China]
Address: Building 7#,Zone A,2nd Area,Liandong U Valley,,Jiansha Rd, Danzao Town, Nanhai District,Foshan,City, Guangdong Provice, China
Contact name:Rita Xie
Foshan Bester Access Control Smart Equipment Co.,Ltd |
|
|
Automatic Tripod Turnstile Gate
Both Directional Automatic Gate Barrier System Tripod Turnstile Access Control For Office Building
Tripod turnstile series are intelligent passage management equipment researched, developed and produced by our company.The equipment is integrated with delicate mechanical transmission, microprocessor control, and various read/write techniques. It can be used for intelligent control and management of the passage after equipped with different read/write devices.
The outline of the product is formed after bending the stainless steel plate. The shape is featured as pleasing appearance, good looking, stainless and durable. The system is provided with a standard electric interface and is easily integrated into the equipment with read/write facilities such as magnetic card, bar code card, ID card and IC card. As a result, an orderly and civilized passage is provided for the personnel in and out, and illegal personnel can be barred. At the same time, a special fire control interface is equipped in the system to meet the requirement of fire control passage, so that a rapid down rod control may be realized in emergency for diverting passengers.
Feature:
• Use of RFID IC cards, ID cards, Barcode or magnet-ic cards as
automatic identification system and achieve access attendance, fees
or function.
• A direction indicator showed that the pedestrian access to the
current status and guide pedestrian correctly and in smooth
passage.
• Semi-auto mode: After reading card the passenger pushes the arm
by hand until he goes through the barriers and the arm arrives in
home position.
• Full-auto mode: The passenger pushes the arm at a little strength
after reading card, and the arm will auto-matically rotate forward
by motor power until the arm arrives in home position.
• Pure mechanical mode: The passenger pushes the arm by hand until
he goes through the barriers.
• Single or bi-directional function in mechanical and electrical
versions.
• Automatic reset of barrier arms after each passage.
• Cable or wireless remote control panel key override control for
emergency situations. Automatically arm drop down when power off or
emergency.
• Adjustable time out delay.
| PRODUCT INFORMATION | |
| Model | BS-S100 |
| Brand | BESTER SMART |
| Size/Stick length | 1200*280*980(mm)/free of case 510(mm) |
| Arm length | 500mm(norm) |
| Material | SUS304 thickness(1.5mm) |
| Input Voltage | AC110-220±10%,50HZ60HZ |
| Driving motor | 24V |
| Failure-free operation | 5 million/time |
| Weight | 45kg |
| Traffic speed | 40 persons/min |
| Flap Opening/Closing Time | 0.2s |
| Channel width | ≤600mm |
| Operating temperature | -30℃—+70℃ |
| Communication interface | RS485/TCP/IP |
| Working environment | indoor and outdoor |
Standard functions & features of Tripod Turnstiles Gate
| 1. | The turnstile system can easily integrates with the 3rd party equipment, such as Biometric reader, consumption system, ESD system and access control system etc. |
| 2. | Operation model: Both directions can be set as controlled mode or free mode, two or one direction can be controlled by switch- button or access controller. |
| 3. | Reset automatically function: Go signal will be cancelled if passage through is not completed within pre- set time. The standard default is 10 seconds (time adjustable by by changing parameter of main control board). |
| 4. | Auto-drop-arm function: the arm can drop down automatically (default), or free passing when the power is off. |
| 5. | Emergency-escape function: the arm will drop down automatically by pressing the emergency button which can be remote-controlled whether the power is on or not. |
| 6. | Powerful on-line intelligent control mode, facilitating you |
| 7. | Optional indication of inside LED counter or outside LED counter |
| 8. | With interface of switch of relay, compatible with all the access
controller |
Product function:
1) The entire system runs smoothly, with a small noise and free of mechanical impact.
The system adopts the exclusive technique of Jaw clutch. As a result, the turnstile is more accurate and reliable for zero point locking and unlocking.
2) DC Brushless Motor, Maintenance Free
3) It has failure self-detect and alarm indication function, facilitating maintenance and application for the users.
4) It is provided with multiple operation modes for selection. It can either read card in double way for flow limit, or reading card in a way while barring in the other, or read card in a way while free passage in the other. Moreover, the operation mode of turnstile may be set up with the built-in small keyboard.
5) It has automatic function of opening or closing when power off.
6) The equipment is provided with a unified, standard electric interface and is available to be integrated with various read/write facilities to facilitate the system integration. It is able to realize far end control and management with the help of administrative computer.
7) It has a function of reading card with or without memory, and it may be set up with the built-in small keyboard in accordance with the requirements of the users.
8)Counting the passing people number automatically, and with LED display
9)Direction indicator function, showing passing or prohibiting for the people
10)Prohibiting opposite direction passing, one side reading the card, the other side will lock when you passing forcedly; the locking time can be set, and unlocked by the card.
11) Prohibiting illegal passing, the turnstile without the card, the locking time can be set, and unlocked by the card.
12) Anti-hit against function, when the turnstile touches the passing people, it will stop and after several seconds, it will turn again.
13) Self resetting function, the system will cancel the people passing right when reading the card but not passing, the time can be set.
14) RS485 Communication function.
