Active Member
|
[China]
Address: Room707, Jude Commercial Building, South Zhengfeng Road, Fuyong town, Baoan District, Shenzhen, Guangdong, China
Contact name:Alan Chang
Shenzhen Mingyang Digital Technology Co.,Ltd |
|
|
2000W Flex Banner Seaming Machine / Welding Machine For
Banner / Heat Welding Machine
Machine Details :
| Product name | Hot air banner welding machine |
| Welder model | Top 2000 C |
| Welder air gun | L eister hot air gun |
| Welder Warranty | One year |
| Welding width | 2-4 cm |
| Welding thickness | 0.22-2mm |
| Welding temperature | 350-400 degree ( normal ) |
| Welding power | 1000-3000W |
| Welding Voltage | 110 V/220 V |
| Welding Frequency | 50-60 HZ |
| Welding Speed | 1-15m/min |
| Welder wheel | Aluminum wheel |
Operation Step :
Step 1 :
Make the cloth for seaming flat and put it underneath.Fix both ends by adhesive tape or something else.
Step 2 :
The overlap width of the two pieces is about 3-mm, the width of the nozzle of hot seaming machine.
Step3 :
Put the machine nozzle between two overlap pieces.The press-wheel should be at left side of nozzle.The nozzle also need align with side of upper piece of cloth.
Step 4 :
Switch on the motor power and then adjust speed.
Step 5 :
Turn on the movement switch.
Step 6 :
Press heating power key to adjust temperature.
Step 7 :
Turn the bar by anticlockwise to fix the position to startup automatic movement.The machine will go along with the overlap path by itself.
Step 8 :
Turn the bar by clockwise to cease the automatic work.
Step 9 :
The operator should control the moving direction and make sure the nozzle connect both with upper and under piece of cloth.
General instruction for safety :
♦ Keep the working place clean. Messing up and the disorderly working place cause disaster
♦ Choose the work place carefully and use the machine in a bright and dry circumstance.
♦ The electricity, controlling box and protective facilities have to be in the proper order after finishing daily work. The electrical power supply has to be switched off definitely.
♦ The machine has to be stopped before gets maintenance or replacing the parts.
♦ Use standard or indicated tools when dismantling or replacing parts.
♦ For safety and the long life of the machine, please do not let the machine operates overtime.
♦ If any special incidents happened, please stop the machine first for repairing, And do not deal with the special incident with improper procedures.
♦ If the machine is operated on land, keep the work place clean and no dust there. If dust or something blocks the inhaling filter of heater, the heating wind can not come cut adequately and then temperature inside of filter will rise to let the heater burn down.
Operation Notice :
► During operating, if the surface cloth is dissolved and scorched or the cloth are not sticked together, please stop to adjust the temperature or speed.
► During operating,if the seaming part is not in right position, please stop to adjust fixing position.
► During operating, make sure clothes are flat so that stick together smoothly.
► The hot wind of heater cannot touch the press-wheel or the rubber of press-wheel is easy to be burned down.
► Adjust temperature to zero before turn off the heater.Switch off after 5-10 minutes
FAQ :
1. Q : What is the use of the machine ?
A : Use hot air to make the PVC Banner welding together |
2. Q : What's the machine work type ?
A : It's Automatic welding |
3. Q : How long is the warranty period?
A : The Warranty is one year |
4. Q : Which kinds of hot air gun it use ?
A : Leister hot air gun |
5. Q : What kinds of materials can it welding ?
A : It can welding PVC / Banner / Flex and other outdoor materials can be hot melt |
Please send your inquiry details at the below , thank you !
