Active Member
|
[China]
Address: No. 5825, Huyi Highway, Waigang Town, Jiading District, Shanghai, PRC.
Contact name:Helen
Ewen (Shanghai) Electrical Equipment Co., Ltd |
|
|
High Power Industrial Voltage Stabilizer 600KVA 380V Three Phase No Noise
1. Quick Details
The chart below shows the basic information of the product parameters.
| Product name | Three phase high power industrial voltage stabilizer | Product type | SBW-600KVA |
| Rated power | 600KVA | Phase | Three phase |
| Input voltage range | 380V/415V/440V ±20% or tailored | Rated output voltage | 380/415/440V or customized |
| Working frequency | 50HZ-60HZ | Power factor | 98% |
| Current type | AC | Insulation class | F |
| Ambient temperature | -10~45℃ | Ambient altitude | Less than 1000 meters |
| Relative humidity | 20%~90% | Ventilation condition | Sound ventilation |
| Power loss | 1% of the rated power capacity | Electricity consumption | Less than 1% of the rated power |
| Temperature rise | Less than 80℃ | Warranty | One year |
2. Introduction
This 600KVA three phase industrial voltage stabilizer is usually used in industrial areas. With a rated capacity of 600KVA, it could bear a large load of various electrical equipment. The input voltage is 380V±20%, or 415V/440V±20%. The output voltage is 380V/415V/440V or customized. The working frequency is 50Hz-60Hz.
It works as a voltage power supply when the input voltage fluctuates. It features in high power, strong load bearing capability, fast reaction rate, low risk of malfunction, high output precision, distortionless waveform, full protection functions, and etc.
3. Protections
There are several protection functions:
| Over-voltage protection | If the output voltage is too high, the voltage stabilizer would stop working. |
| Over-load protection | The over-load protection function would work if the load is over the rated capacoty. |
| Under-voltage protection | If the output voltage is too low, this 600KVA industrial voltage stabilizer would power off automatically. |
| Over-current protection | The same as over-load protection function, the voltage stabilizer would power off automatically. |
| Time delay protection | The output voltage would be delayed for several seconds before it is transmitted to the load equipment. |
4. Product Recommended
| Product Name | Model | Input Voltage Range | Output Voltage | Rated Current(A) |
Three phase voltage stabilizer /regulator | TNS-9KVA | 380V/415V /440V±20% or tailored | 380V/415V /440Vor tailored | 13 |
| TNS-15KVA | 22 | |||
| TNS-30KVA | 45 | |||
| TNS-45KVA | 68 | |||
| TNS-50KVA | 75 | |||
| TNS-60KVA | 91 | |||
| TNS-90KVA | 136 | |||
Single phase voltage stabilizer /regulator | TND-10KVA | 220V/110V ±20%or tailored | 220V/110V or customized | 45 |
| TND-15KVA | 68 | |||
| TND-20KVA | 90 | |||
| TND-30KVA | 136 | |||
| TND-40KVA | 181 | |||
| TND-50KVA | 227 | |||
High power voltage stabilizer /regulator (Single phase) | DBW-50KVA | 220V/110V ±20%or tailored | 220V/110V or tailored | 227 |
| DBW-80KVA | 363 | |||
| DBW-100KVA | 454 | |||
| DBW-150KVA | 681 | |||
| DBW-180KVA | 818 | |||
| DBW-200KVA | 909 | |||
| DBW-300KVA | 1363 | |||
High power voltage stabilizer /regulator (Three Phase) | SBW-50KVA | 380V/415V /440V±20% or tailored | 380V/415V/440V or tailored | 75 |
| SBW-80KVA | 121 | |||
| SBW-100KVA | 151 | |||
| SBW-120KVA | 182 | |||
| SBW-150KVA | 227 | |||
| SBW-200KVA | 303 | |||
| SBW-300KVA | 455 | |||
| SBW-400KVA | 607 | |||
| SBW-500KVA | 759 | |||
| SBW-600KVA | 911 | |||
| SBW-700KVA | 1063 | |||
| SBW-800KVA | 1215 | |||
| SBW-900KVA | 1367 | |||
| SBW-1000KVA | 1519 |
5. More Picture
