Active Member
|
[China]
Address: Buiding A, No.138, Santun Industrial Boulevard, Houjie Town, Dongguan,Guangdong,China.
Contact name:manager
Shenzhen Green Source Light Equipment Co., Ltd. |
|
|
low intensity airport obstruction light
GS-LI/D Low-intensity Double Aviation Obstruction light, Base adopts metal stoving varnish.
Light source adopt with independent research and development dedicated LED chip, which have the specific of high light intensity ,low power consumption and long service life.
Lampshade adopt with PC material, it can resist corrosion, anti-UV, anti-shock; management circuit with Strong lightning protection and With the surge protection device, which can adopt to extremely bad working environment.
This lamp with photoswich, it can turn on when light intensity less than 50LUX, and turn off when above 50Lux.
| Specification | |
| FAA Classify: | L-810 |
| Type: | GS-LI/D |
| Operating Voltage: | AC 110V/220V, DC 12V/24V/48V |
| Power Supply Frequency: | 50Hz～60Hz |
| Average Power Consumption: | ≤3W |
| Working Mode: | Steady burning, flashing, flashing alternately |
| Light Intensity: | Type B ≥32.5cd Type A ≥10cd |
| Horizontal Out-put: | 360° |
| Vertical Divergence: | 10° |
| Light Source service Life: | ≥20 years |
| Emitting Color: | Red |
| Overall Size: | 285mm×130mm×315mm |
| Installation Size: | 100mm×M10mm×4 |
| IP Protection: | IP67 |
| Optical Ambient Brightness: | 50/100Lux |
| Ambient Temperature: | -40℃～70℃ |
| Weight: | 3kg |
| Anti-Wind Ability: | 120m/s |
Features
1. airport obstruction light' stainless steel baked with the lacquer base.
2. Special LED chips, with brightness, low power consumption and
long life.
3. PC material cover, provides strong corrosion resistance, UV
resistance, impact resistance.
4. With lightning protection ability for aviation lamps and control circuit with anti surge protective device that
can apply to poor working environment.
5. With light-operated switch. When under the condition of less
than 50Lux light, it can automatically switch ON the light, and if
it under the conditions of over 50Lux light, it can automatically
switch OFF.
Attention/ Usage Tips
1. Check whether the supply voltage does comply with the rated
voltage of device.
2. Do not open it if the device is out of operation, in order not
to be hurt by the internal high pressure.
3. After finished the installation, the personnel must check
whether the device is in a good waterproof processing and whether
the screw spikes are tight
4. Non-professional workers can not do the device maintenance, in
order not to expand the error and be hurt.
Application
Building
Airport
High Mastlamp
Chimney
Towers(Telecom, GSM, Electric)
Bridge
High-rise Buildings
Dimension drawing
Our factory
