Active Member
|
[China]
Address: Room D-011 No. 517 Ming-ze Peninsula Luoshi South Road, Hongshan District, Wuhan City
Contact name:Cassie Xiong
Wu Han Micro Control Electric Co., Ltd. |
|
|
Web Control DC36V Manual Tension Controller For Particle Brake Film Machine ST-200M Manual Tension Controller
ST-200M Manual tension controller (36V)
Features:
1. With Over-current, overheating short-cut protection.
2. No fan cooling
3. With panel,external connect PLC,external potentiometer control methods.
Attention:ST-203M installing size same as ST-200P
| Parameter | ||
| Model | ST-203M | ST-205M |
| Power supply | AC 180~260V 50/60HZ | |
| Output voltage | DC36V | |
| Output current | 0~3A | 0~5A |
| Dimension | ST-203M:180*110*137mm | ST-205M:246*154*114mm |
We also have other model for Option
ST-100 manual tension controller
Features:
1. Small in size and thin in case.
2. No fan cooling
3. Max output current 4.00A,adjust step 0.01A.
4. 10s no operation,can remember present output current value.
5. With short cut protection.
6. With forbidden output and allow output function.
| Parameter | ||||
| Model | ST-101 | ST-102 | ST-103 | ST-104 |
| Power supply | DC26~28V/5A | |||
| Output voltage | DC24V | |||
| Output current | 0~1A | 0~2A | 0~3A | 0~4A |
| Dimension | 96*69*32mm | |||
ST-200D/P manual tension controller
Features:
1. With Over-current, overheating short-cut protection.
2. Adapt multi-circles precision adjusting technology.
3. With panel,external connect PLC,external potentiometer control methods.
Normal type
Ultra-thin type
| Parameter | |||
| Model | ST-202D/P | ST-203D/P | ST-204D/P |
| Power supply | AC 180~260V 50/60HZ | ||
| Output voltage | DC24V | ||
| Output current | 0~2A | 0~3A | 0~4A |
| Dimension | ST-200D:180*110*70mm ST-200P:180*110*137 | ||
ST-200W Manual tension controller
Features:
1. With Over-current, overheating short-cut protection.
2. No fan cooling
3. With forbidden output and allow output function.
| Parameter | |||
| Model | ST-201W | ST-202W | ST-203W |
| Power supply | AC 180~260V 50/60HZ | ||
| Output voltage | DC24V | ||
| Output current | 0~1A | 0~2A | 0~3A |
| Dimension | 96*96*129mm | ||
Normally manual tension controller can connect Magnetic powder brake or clutch in using.
Hollow magnetic powder Brake
Hollow Brake is a superior performance of automatic control
components, it is driven by the drive unit and the unit merged. It
powder as the working medium to excitation current control means to
control the brake or transmission of torque. Its output torque and
magnetizing current good linear relationship, and with fast
response, simple structure, making it suitable for wire, cable,
printing, packaging, textiles, rubber, leather, metal foil tape
processing, paper and paper processing Tension Control System and
other relevant coiling device.
Used for printing machine, compound machine, cutting machine, pouch machine and lamination machine and so on.
We can also can supply powder brake with mounting brackets as left
figure.
1. Volatge: dc 24v
2. Magnetic powder clutch/brake0.6KG-40KG stock supply
3. Imported highly magnetized magnetic powder
4. Imported wool felt and NSK bearings operate smoothly
5. Coil 100% use enamelled copper wire
6. Cast steel material
| Model | Torque NM | Voltage V | Current A | Speed rpm/min | Slip power w | Outline dimention | Hollow shaft size | Flange size | Fixed stator Size | ||||||||||
| D | L | d(H7) | b(F8) | L1 | L2 | L3 | d1*depth | D1(g7) | D2 | D3 | D4 | L4 | d2*depth | ||||||
| ZA-0.6A | 6 | 24 | 0.3 | 1800 | 130 | 128 | 86 | 15 | 4 | 4 | 21 | 21 | M6*10 | 70 | 60 | 60 | 82 | 7 | M4*8 |
| ZA-1.2A | 12 | 24 | 0.39 | 1800 | 320 | 160 | 103 | 18 | 5 | 5 | 25 | 32 | M6*10 | 80 | 68 | 68 | 96 | 13 | M6*8 |
| ZA-2.5A | 25 | 24 | 0.73 | 1800 | 450 | 180 | 119 | 20 | 5 | 5 | 26 | 36 | M6*10 | 90 | 80 | 80 | 114 | 17 | M6*8 |
| ZA-5A | 50 | 24 | 0.94 | 1800 | 700 | 220 | 150 | 30 | 7 | 7 | 31 | 48 | M8*12 | 110 | 95 | 95 | 150 | 20 | M8*12 |
| ZA-10A | 100 | 24 | 1.21 | 1800 | 900 | 275 | 166 | 35 | 10 | 10 | 32 | 48 | M10*18 | 125 | 110 | 110 | 176 | 18 | M10*18 |
| ZA-20A | 200 | 24 | 1.9 | 1000 | 1900 | 335 | 198 | 45 | 12 | 12 | 45 | 59 | M10*18 | 160 | 140 | 140 | 200 | 21 | M10*18 |
| ZA-40A | 400 | 24 | 2.2 | 1000 | 2600 | 360 | 258 | 50 | 14 | 14 | 50 | 68 | M10*18 | 160 | 140 | 140 | 200 | 21 | M10*18 |
FAQ
1. How can you contact us?
Pls contact us by email,Skype,Whatsapp.
2. How can you place the order from us?
You can let us know your detail request,we can design the best
solution for you;and if you have your detail engineer drawing,pls
don’t hesitate to send us.
3. What is the MOQ in our company?
As for most of products,we don’t have MOQ.
4. What is your delivery time of the products?
For air shaft and other customized products need time to
manufacture,the delivery time is about 7~15days;For Magnetic powder
brake/clutch,Air disc brake/clutch,tension control system…etc,we
have stock in factory,the delivery time is 3~5days.
5. What is your trade term?
Usually we accept trade by EXW,FOB,CIF…etc,you can choose the best
way you would like.
