Active Member
|
[China]
Address: Dikouzhang Bozhen Botou Cangzhou City Hebei Province China
Contact name:Shirly
ZhongHeng Machine Manufacture Co.,Ltd |
|
|
6 Tops Trapezoidal Roofing Sheet Roll Forming Machine
Description
1: Beautiful appearance, low noise, high efficiency
2. Multiple function: besides corrugated sandwich panels,
this line can be used to produce simple corrugated sheets, and
sandwich panels.
3. The line employs advanced PLC and sets the panel length and cuts
the panel automatically.
4. The main body is welded with type "H" section steel as its
material,strong strength.
5. The length can be as required sizes, the width is
fixed.
Specification
NO. | ITEM | PARAMETER | NOTE | |
1. | Suitable | Type | Pre-painted sheet, |
|
Width(mm) | 600mm |
| ||
Thickness(mm) | 0.3-0.8mm |
| ||
Yield stress(mm) | G220-G300 |
| ||
2. | Product | Detail as the attached file | ||
Length | Any length |
| ||
3. | Power | Type | 380v/3ph/50hz | Motor brand shanghai Lichao |
Main Motor power | 7.5kw | |||
Cutter power | 4kw | |||
4. | Forming speed(m/min) | 8-10m/min | Not include the time of cutting | |
5. | Manual Decoiler | Type | Manual |
|
Max capacity | 5t |
| ||
Suitable coil OD(MM) | 1000 |
| ||
Suitable coil | 508 |
| ||
6. | Forming stand | 18 | Depend on actual design | |
7. | Thickness of structure | 16mm |
| |
8. | Forming shaft diameter(mm) | 70solid |
| |
9. | Type of cutting | Roll formed and |
| |
10. | Control system | Panasonic PLC and inverter |
| |
11. | Install dimension(depend on the final design) | 7.2m×1.1m×1.3m | Without panel length | |
12. | Total weight (Approx) | 5T | Depend on final design | |
Flow chart
Uncoiling→Feeding material into machine→Roll forming→Measuring length→ Auto cutting
→Products receiving
MachineComponents
No | Name | Quantity | Remarks | |
1 | Decoiler | 1set | Up to customer | |
2 | Main machine | Pre-cutting device | 1set | Up to customer |
Feeding device | 1set |
| ||
Roll forming system | 1set |
| ||
Post cutting device | 1set |
| ||
Hydraulic system | 1set |
| ||
3 | Electric control system | 1set |
| |
4 | Supporter/Automatic Stacker | 1set | ||
Competitive Advantage:
1. Full Automatic
2. Welded iron type
3. Save money
4. excellent quality
5. Operate easily
